Owner`s manual

39 Owner’s Manual
English
Messages
Most messages and alerts will appear at the bottom of the normally used screens.
Several alerts and messages may be displayed in a sequence.
– – –°F – – –°C
Water Temperature is Unknown
After the pump has been running for 1 minute, the temperature will be displayed.
Possible freezing condition
A potential freeze condition has been detected. All water devices are activated. In some cases,
pumps may turn on and o and the heater may operate during Freeze Protection. This is an
operational message, not an error indication.
The water is too hot – M029*
The system has detected a spa water temp of 110°F (43.3°C) or more, and spa functions are
disabled. System will auto reset when the spa water temp is below 108°F (42.2°C). Check for
extended pump operation or high ambient temp.
*M0XX is a Message Code. Codes like this will be seen in the Fault Log
GENERAL MESSAGES