Owner`s manual

36 Owner’s Manual
English
ADDITIONAL SETTINGS
GFCI Test
(Feature not available on CE rated systems.)
Your systems may have GFCI congured in one
of three ways:
1. Both manual and automatic GFCI tests are
enabled. The automatic test will happen within
7 days of the spa being installed and if success-
ful will not repeat. (If the automatic test fails it
will repeat after the spa is restarted.)
GFCI Test will not appear on the screen if it is
not enabled. This screen allows the GFCI to be
tested manually from the panel and can be
used to reset the automatic test feature.
(See Page 38)
*M0XX is a Message Code. Codes like this will be
seen in the Fault Log
Preferences
The Preferences Menu allows the user to
change certain parameters based
on personal preference.
Temp Display
Change the temperature between Fahrenheit
and Celsius.
Time Display
Change the clock between 12 hr and 24 hr
display.
Reminders
Turn the reminder messages (like “Clean Filter”)
On or O.
Cleanup
Cleanup Cycle Duration is not always enabled,
so it may not appear. When it is available, set
the length of time Pump 1 will run after each
use. 0-4 hours are available.
Color
Selecting Color will cycle through 5 back-
ground colors available in the control.
Language
Change the language displayed on the panel.