Owner`s manual

34 Owner’s Manual
English
Light Cycle Option
If Light Cycle does not appear in the Settings
Menu, the Light Timer feature is not enabled
by the manufacturer. When available, the Light
Timer is OFF by default. The settings can be ed-
ited the same way that Filter Cycles are edited
(see page 13).
Invert Panel
Selecting Invert Panel will ip the display
and the buttons so the panel can be easily
operated from inside or outside the hot tub.
ADDITIONAL SETTINGS
Specic Buttons for Specic Devices
If the spa has an Auxiliary Panel(s) installed, pressing buttons on that panel will activate the
device indicated for that button. These dedicated buttons will operate just like the Spa Screen
buttons (see page 5) and the equipment will behave in the same manner with each button press.
AUXILIARY PANEL(S)
The control can be restricted to prevent unwanted use or
temperature adjustments. Locking the Panel prevents the
controller from being used, but all automatic functions
are still active. Locking the Settings allows Jets and other
features to be used, but the Set Temperature and other pro-
grammed settings cannot be adjusted. Settings Lock allows
access to a reduced selection of menu items.
These include Filter Cycles, Invert, Information and Fault Log.
They can be seen, but not changed or edited.
RESTRICTING OPERATION