Owner`s manual
33
Owner’s Manual
English
Main Filtration
Using the same adjustment as Setting the Time, Filter Cycles are set using a start time and a
duration. Each setting can be adjusted in 15-minute increments. The panel calculates the end
time and displays it automatically.
ADJUSTING FILTRATION
Filter Cycle 2 - Optional Filtration
When a lter cycle is OFF it displays as “No”. When a Filter Cycle is ON it displays as “Yes”.
Press “Yes” or “No” to toggle Filter Cycle 2 ON or OFF. When Filter Cycle 2 is ON, it can be adjusted
in the same manner as Filter Cycle 1. It is possible to overlap Filter Cycle 1 and Filter Cycle 2,
which will shorten overall ltration by the overlap amount.
Purge Cycles
In order to maintain sanitary conditions, as well as protect against freezing, secondary water
devices will purge water from their respective plumbing by running briey at the beginning of
each lter cycle. If the Filter Cycle 1 duration is set for 24 hours, enabling Filter Cycle 2 will initiate
a purge when Filter Cycle 2 is programmed to begin.
The Meaning of Filter Cycles
1. The heating pump always runs during the lter cycle
2. In Rest Mode, heating only occurs during the lter cycle
3. Purges happen at the start of each lter cycle