Owner`s manual

32
Operation
JetZones
™
Spas powered by two pumps provide a unique feature called
JetZones. A JetZone
™
is a region of jets powered by the same
pump. With JetZones, you decide which JetPaks
®
are
powered by each pump. Two-pump spas have two JetZones.
Each pump (on two-pump models only) provides water ow
to its own JetZone. Each JetZone can be customized with the
use of a JetZone Divider
™
(included).
By simply moving the JetZone Divider, you can increase or
decrease the number of JetPaks that are powered by a
particular pump, thus creating a new JetZone. By adding
JetPaks to a particular JetZone, you will decrease the power
to that zone. By removing JetPaks from a particular zone, you
will increase the power to that zone. To create a New
JetZone:
Step 1: Remove the JetPaks by following steps 1-5 in Interchanging
JetPaks of the JetPak section.
Step 2: Loosen the two PVC unions, pull the manifold out from
the two water unions and remove the JetPak from the JetPod
™
.
Step 3: Remove the JetZone Divider and reinstall the divider in
a location of your choice (never install in either the rst or the
last seat).
Step 4: Reattach the JetPaks by reversing the JetPak removal
procedure.
WARNING: Never operate the spa without the JetZone
Divider in place or by installing the JetZone Divider in the rst
or the last seat. Doing so may cause serious damage to the
pumps.