Owner`s manual

30
Operation
Step 6: Exchange JetPaks
®
.
Step 7: Reattach the JetPaks by reversing steps 1-5.
IMPORTANT: Spa models with two pumps have two different
JetZones
™
. These JetZones are divided by a JetZone Divider
™
.
Never operate the spa without the JetZone divider in place.
Doing so will cause serious damage to the pumps. In addition,
interchanging JetPaks
®
from one JetZone to another may
result in improper water ow to one or more JetPaks. Do not
install the JetZone Divider in either the rst or the last seat. If
you have questions or problems, see the JetZones section or
contact your authorized Bullfrog Spa dealer.
NOTE: Due to its large amounts of plumbing and jets, the
NeckBlaster
™
JetPak will only t in the Lounger or Recliner
(corner seats).