Owner`s manual

29
JetPaks
®
Interchanging JetPaks
Step 1: Put the spa in Standby mode, this will prevent the
pump(s) from activating (see Control System).
Step 2: Carefully, remove the head rest and SnapCap
™
by
lifting upwards.
Step 3: Push the JetPak
™
forward until you have enough room
to reach the two PVC water unions and air-line union.
Step 4: Loosen the two PVC unions, pull the manifold out from
in between the two water unions and remove the JetPak from
the JetPod
™
.
Operation
Step 5: Disconnect the air line union.