Owner`s manual
27
Message Meaning Action Required
The spa is operating in Standard mode. Temperature display is current after pump has been running for at least 2 minutes.
Press temp followed by light to switch modes.
The spa is operating in Economy mode. Ecn will appear solid on the display when the temperature is not current. Ecn will
alternate with the temperature when the temperature is current. Press temp
followed by light to switch modes.
The spa is operating Standard-in-
Economy mode.
Operates the same as Standard mode; however it will revert to Economy mode
after 1 hour. Press temp + light to switch directly to Economy mode.
The spa is in Sleep mode. Press temp + light to switch modes.
The spa is in Standby mode. Press any button to exit mode and return to normal operation.
Periodic Reminder Messages (On Premier Control Panel, press mode/prog to reset a displayed reminder. On Select and Basic
Control Panels, press temp + light to reset a displayed reminder.)
Every 7 days Test and adjust chemical levels per manufacturer’s instructions.
Every 7 days Test and adjust chemical levels per manufacturer’s instructions.
Every 30 days Remove, clean, and reinstall lter per manufacturer’s instructions.
Every 30 days Test and reset GFCI per manufacturer’s instructions.
Every 90 days Drain and rell spa per manufacturer’s instructions.
Every 180 days Clean and condition cover per manufacturer’s instructions.
Every 180 days Clean and condition cabinet per manufacturer’s instructions.
Every 365 days Install new lter.
WARNING! SHOCK HAZARD! No User Serviceable Parts.
Do not attempt service of this control system. Contact your authorized Bullfrog Spa dealer or service organization for
assistance. Follow all power connection instructions listed in this manual. Installation must be performed by a licensed
Electrician and all grounding connections must be properly installed.
Operation