Technical Specifications
2
STEP Installing the base
Apply a 1/8" width silicone bead around the edge of
the drain hole in the base (refer to illustrations).
Assemble as shown.
Install the base (13) pushing it completely against the
back studs. Center the base left to right inside the
alcove leaving equal spacing on both sides.
13
Leveling the base is critical
for wall alignment
Verify that the base is completely level on all sides.
Conrm that the drain pipe is centered. We recommend
that a plumber completes the drain pipe connection.
Centering the base left to right is
critical for side wall installation.
Top view
13
Remove clear plastic lm on the base. Use
cardboard on the base oor as protection until
the installation is complete.
Top view
Flush
2.1
Check me!
2.2
Check me!
2.3
Check me!
Cardboard
Rubber
Studs
Threshold