Installation Guide


Check me!
Place the template in the corner of the shower where
you want to install your shelf.
Slide the template up until the points on the left and
right-hand side of the template are at the height you
want your shelf.
Use a pencil, marker or wax pencil to mark the spots
where the holes for the shelf will be drilled.
Drill the holes using a 1/8" drill bit. See caution notes.
1
STEP Marking and drilling the
glass shelf holes
Fold here
Drilling positions
Apply silicone in the previously drilled holes on the side
and back walls. Apply silicone to the rear of the shelf
brackets (2).
Fasten the brackets in place using the screws (3).
2
STEP Glass shelf installation
3
2
2
2.1
Check me!
Do not drill over fresh grout or
silicone
90°
If installing over ceramic tile use
#10 wall anchors and drill bit for
ceramic tile. Refer to anchor for
recommended drilling size.