User manual

Kanallisten

CH.No XMIT Freq RCV Freq Single Freq Use

5A 156.275 156.275 x Port Operations

66A 156.325 156.325 x Port Operations

67 156.375 156.375 x Commercial. Used for Bridge-to-bridge communications in lower

Mississippi River. Intership only. 6

68 156.425 156.425 x Non-Commercial

69 156.475 156.475 x Non-Commercial

71 156.575 156.575 x Non-Commercial

72 156.625 156.625 x Non-Commercial (Intership only)

73 156.675 156.675 x Port Operations

74 156.725 156.725 x Port Operations

77 156.875 156.875 x Port Operations (Intership only) 5

78A 156.925 156.925 x Non-Commercial

79A 156.975 156.975 x Commercial. Non-Commercial in Great Lakes only.

80A 157.025 157.025 x Commercial. Non-Commercial in Great Lakes only

81A 157.075 157.075 x U.S.Government only – Environmental protection operations.

82A 157.125 157.125 x U.S. Government only

83A 157.175 157.175 x U.S. Coast Guard only

84 157.225 161.825 Public Correspondence (Marine Operator)

85 157.275 161.875 Public Correspondence (Marine Operator)

86 157.325 161.925 Public Correspondence (Marine Operator)

87 157.375 161.975 Public Correspondence Marine Operator)

88 157.425 162.025 Public Correspondence only near Canadian border

88A 157.425 157.425 x Commercial, Intership only

– Recreational boaters normally use channels listed as Non-Commercial: 68, 69, 71, 72, 78A.

– Channel 70 is used exclusively for Digital Selective Calling (DSC) and is not available for regular voice communica-

tions.

– Channels 75 and 76 are reserved as guard bands for Channel 16 and are not available for regular voice communi-

cations.

Notes:

1. The letter “A” following a channel number indicates simplex use of the ship station transmit side of an internatio-

nal semi-duplex channel. Operations are different from that of international operations on that channel.

2. Channel 13 should be used to contact a ship when there is danger of collision. All ships of length 20 meters or

greater are required to guard VHF channel 13, in addition to VHF channel 16, when operating within U.S. territorial

waters.

3. Channel is Receive Only.

4. Channel 16 is used for calling other stations or for distress alerting.

5. Output power is ﬁxed at 1 watt only.

6. Output power is initially set to 1 watt. User can temporarily override this restriction to transmit at high power.