User manual

Page 11 Rev. 3

6. After entering a valid ATID ID for the second time, the ATIS ID will be flashed in

sequence one time on the screen, and the radio will revert into previously working

channel saved in the memory before the radio is turn off. If no channel is found in

the memory, the radio will revert to CH16 at High Power setting

7. Store the ATIS ID permanently into the radio by turning the radio off.

8. After the ATIS ID being programmed into the radio, from OFF position holding

HI/LO/Lock and turning the radio ON will make the radio flash its ATIS ID. After this

stage, only with the cloning software the ATIS ID be modified or erased.

ETC….