User manual

Page Rev. 3

7. Turn off radio,permanently save ATIS ID to the EEPROM of the radio.

8. After the ATIS ID being programmed into the radio, from OFF position holding

HI/LO/Lock and turning the radio ON will make the radio flash its ATIS ID. After this stage,

only with the cloning software the ATIS ID be modified or erased.

9.At the ATIS mode,part of international channels are restricted to transmit on

low-power,such as CH6，CH8，CH10，CH11，CH12，CH13，CH14，CH71，CH72，CH74，

CH77.

D.2 Special Function Keys

ETC….