User manual

20 21
WORKING MODE
1) Frequency Mode (VFO)
Under this mode, you can use [ ] / [ ] key to change the frequency or input the
frequency by keypad directly and store channels.
2) Frequency-Channel Mode (MR)
When you have stored a memory channel at least and under VFO mode, press [ ]
key to enter MR mode.
The frequency will be indicated on the display and the channel No. will be indicated at
the right side. If the transceiver display name option is ON and channel name edited, it
will show the name of the channel.
Please see Shortcut Menu Operation Item 23&24. Page 37.
5) MENU Mode
Press [ ] key to enter MENU mode, there are 34 items in total. Please see SET
MENU MODE. Page 22
6) Reset Mode
Press [ ] key and switch the power on to enter Reset mode, then press [ ] key
to enter.
1. [ ] or [ ] key to select VFO/FULL.
2. VFO: initialize all setting under frequency mode.
3. FULL: initialize all setting under frequency and memory mode.
3) Channel Mode (CH)
When you have stored a memory channel at least, press [ ] key and switch power
on the radio, enter CH mode. Channel No. will be indicated on the display and if the
transceiver display mode option is ON, it will show the name of the channel.
Please see Shortcut Menu Operation Item 23&24. Page 37.
4) FM Radio Mode
The transceiver provides frequency 70.00-108.00MHz FM radio.
Under this mode, you can choose FM frequency you need directly. Scan frequency
range and store your favorite channels. Press [ ] to enter and exit FM radio mode.