User manual

6160
remote un-stun, the radio will quit the remote stun status and enter
normal operation.
1)
2)
Simple version don’t have this function
DTMF version
A. Click in sequence “program → Optional Features → Optional Signal → DTMF →
Remote kill/stun code” to input your desired Remote kill/stun code
B. In transmitting, input the Remote kill/stun code for the radio which you want to remote
kill/stun.
C. Remote revive code is “remote stun code + #”, but the remote kill one aren’t able to
be revived by this way.
e.g.: There are two radios with the same DTMF encode. The remote stun code for radio
A is 12345678, remote kill one is 87654321. If you want to remote un-stun it,
please use another radio to input the working frequency of radio A, press [PTT] to
transmit, at the same time to input remote stun code 12345678. After receiving this
code, the radio will enter the remote stun status and you will hear a sound. And
then press [PTT] and input DTMF code 12345678#, the radio will quit the remote
stun status and enter normal operation. The operation of remote kill is the same to
remote stun, but in this situation, radio cannot be revived by this way.
B. press [ ], LCD displays ‘------‘, input the code directly and then press [PTT] to
transmit.
e.g.: the Remote stun code for radio A is 1234567, revive code is 2345678, remote kill
one is 7654321. If you want to remote stun it, please use another one, radio B to
input the working frequency of radio A, then press [ ], LCD displays “-----“, input
in sequence 1234567, then press [PTT] to transmit. After receiving this code, the
radio A will enter the remote stun status and you will hear a sound. If you want to
3) 5T&2T Version
A. Click in sequence “program → Optional Features → Optional Signal → 5-Tone →
Remote kill/stun code” to input your desired Remote kill/stun code, the fixed one is
7 characters.