Datasheet
Table Of Contents
- General Description
- Features
- Ordering Information
- Applications
- Key Specifications
- Functional Description
- Figure 2 Functional Block Diagram
- Image Sensor Array
- Analog Amplifier
- 10-Bit A/D Converters
- Channel Balance
- Black Level Compensation
- Windowing
- Timing Generator and Control Logic
- Digital Signal Processor (DSP)
- Output Formatter
- Compression Engine
- Microcontroller
- SCCB Interface
- Strobe Mode
- Reset
- Power Down Mode
- Digital Video Port
- Pin Description
- Electrical Characteristics
- Timing Specifications
- Figure 13 SCCB Interface Timing Diagram
- Table 9 SCCB InterfaceTiming Specifications
- Figure 14 UXGA, SVGA, and CIF Line/Pixel Output Timing
- Table 10 Pixel Timing Specifications
- Figure 15 UXGA Frame Timing
- Figure 16 SVGA Frame Timing
- Figure 17 CIF Mode Frame Timing
- Figure 18 Frame Exposure Mode Timing with EXPST_B Staying Low
- Figure 19 Frame Exposure Mode Timing with EXPST_B Asserted
- Table 11 Frame Exposure Timing Specifications
- OV2640 Light Response
- Register Set
- Package Specifications
- Revision History
Package Specifications
Version 1.6, February 28, 2006 Proprietary to OmniVision Technologies 31
O
mni ision
IR Reflow Ramp Rate Requirements
OV2640 Lead-Free Packaged Devices
Figure 23 IR Reflow Ramp Rate Requirements
Note: For OVT devices that are lead-free, all part marking letters are
lower case
Table 15 Reflow Conditions
Condition Exposure
Average Ramp-up Rate (30°C to 217°C) Less than 3°C per second
> 100°C Between 330 - 600 seconds
> 150°C At least 210 seconds
> 217°C At least 30 seconds (30 ~ 120 seconds)
Peak Temperature 245°C
Cool-down Rate (Peak to 50°C) Less than 6°C per second
Time from 30°C to 245°C No greater than 390 seconds
-22 -2 18 38 58 78 98 118 138 158 178 198 218 238 258 278 298 318 36
9
338 358
3.32.82.21.61.10.60.0 3.9
0.0
20.0
40.0
60.0
80.0
100.0
120.0
140.0
160.0
180.0
200.0
220.0
240.0
260.0
280.0
300.0
Temperature ( C)
Time (sec)
endZ7Z6Z5Z4Z3Z2Z1