Datasheet

Vehicle management
Smart transportation
Smart bookshelf
EasyLoader
1.EasyLoader is a simple and fast program burner. Every product page in EasyLoader provides a
product-related case program. It can be burned to the master through simple steps, and a series
of function verification can be performed. .
2
. After downloading the software, double-click to run the application, connect the M5 device to
the computer through the data cable, select the port parameters, click "Burn" to start burning.
(For M5StickC burning, please Set the baud rate to 750000 or 115200)
Example
1. Arduino IDE
The code below is incomplete. To get complete code, please click here.
After programming the RFID.ino, the IC card or the mobile phone NFC, close to the unit, moves back and
forth around the unit, and the UID of the IC card or the RFID chip in the mobile phone will be printed on
the screen of the M5Core.
3. Currently EasyLoader is only suitable for Windows operating system, compatible with M5
system adopts ESP32 as the control core host. Before installing for M5Core, you need to install
CP210X driver (you do not need to install with M5StickC as controller)
M5Stack Docs