Datasheet

Mini 3A Relay Unit | m5stack-store

Description

RELAY, as its namesake, is a M5Unit that implenments a Relay functions. Relay can be

used as an electrically operated switch, uses an electromagnet to mechanically operate a

switch,to where it is necessary to control a large power load circuit by a separate low-

power signal, like a digital signal output from a mircoprocessor. Up to 30V DC and

220V AC.

There are 3 pins named: ON, OFF, COM. You can program to make COM connect to ON

or OFF, just by high and low out put of a digital GPIO.

Product Features

1/2

PAGE 1
Mini 3A Relay Unit | m5stack-store Description RELAY, as its namesake, is a M5Unit that implenments a Relay functions. Relay can be used as an electrically operated switch, uses an electromagnet to mechanically operate a switch,to where it is necessary to control a large power load circuit by a separate lowpower signal, like a digital signal output from a mircoprocessor. Up to 30V DC and 220V AC. There are 3 pins named: ON, OFF, COM.
PAGE 2
Single-BUS control Up to 3A @ 30 V DC or 220 V AC Software Development Platform: Arduino, UIFlow(Blockly,Python) Two Lego-compatible holes Include 1x RELAY Unit 1x Grove Cable 1x 3.96 soket Applications Remote control of high-power appliances, such as refrigerators, air conditioners, TVs, etc.