Datasheet

product-related case program. It can be burned to the master through simple steps, and a series
of function verification can be performed. .
2. After downloading the software, double-click to run the application, connect the M5 device to
the computer through the data cable, select the port parameters, click "Burn" to start burning.
(For M5StickC burning, please Set the baud rate to 750000 or 115200)
Example
1. Arduino IDE
3. Currently EasyLoader is only suitable for Windows operating system, compatible with M5
system adopts ESP32 as the control core host. Before installing for M5Core, you need to install
CP210X driver (you do not need to install with M5StickC as controller)
1. Easyoader is a simple and fast program burner. Every produ
LE
The code below is incomplete(just for usage).
M5Stack Docs