Datasheet

Module SERVO

Description

quick work of your next Servo project! It is able to drive mutiple Servo motors, up to 12 channels(Max

load :14W) . We also added an DC input for power supplement. Through M-BUS the DC in can

automatically power the M5 core at top.

Servo is powered by MEGA328 communicate via IIC(0x53).

Product Features

12x servo ports

DC power input: 5-7V

DC Connector Type: XT30 (female)

Power adapter interface: 5.5mm x 2.1mm

Product Size：54.2mm x 54.2mm x 12.8mm

Product weight：24.5g

Include

1x M5Stack Servo Module

1x Common Male to XT30 Male DC convertor

Applications

Humanoid robot

Bionic multi-joint robot

Triaxial Camera Cradle

M5Stack Docs

SERVO is made to implement the bestest, easiest way to drive Servo motors. This M5 module will make

PAGE 1
M5Stack Docs Module SERVO Description SERVO is made to implement the bestest, easiest way to drive Servo motors. This M5 module will make quick work of your next Servo project! It is able to drive mutiple Servo motors, up to 12 channels(Max load :14W) . We also added an DC input for power supplement. Through M-BUS the DC in can LE automatically power the M5 core at top. Servo is powered by MEGA328 communicate via IIC(0x53).
PAGE 2
The Firmware of inside MEGA328 M5Stack Docs EasyLoader 1.EasyLoader is a simple and fast program burner. Every product page in EasyLoader provides a product-related case program. It can be burned to the master through simple steps, and a series of function verification can be performed.(Currently EasyLoader is only available for Windows OS) 2.
PAGE 3
M5Stack Docs arduino #define SERVO_ADDR 0x53 //the IIC address of SERVO Module /* * control servo(CH channle) by us */ Wire.beginTransmission(SERVO_ADDR); Wire.write(CH|0x00); Wire.write(timeL); Wire.write(timeH); Wire.endTransmission(); /* * control servo(CH channle) by angle */ Wire.beginTransmission(SERVO_ADDR); Wire.write(CH|0x10); Wire.write(angle);//0-180° Wire.endTransmission(); 2. UIFlow Wanna explore the easiest way of Servo programming?? Check out the Blockly Platform at UIFlow.
PAGE 4
M5Stack Docs