Datasheet

PuppyC (W/O M5StickC)

Description

PuppyC is a programmable four-legged robot base compatible with M5StickC. It

contains the STM32F030F4 microcontroller，Four SG90 micro servos, a battery holder

and an independent switch.

PuppyC base needs to be used in conjunction with the M5StickC controller.After the

StickC is programmed, it communicates with PuppyC through the I2C protocol (0x38)

to control the steering motion.

It walks slowly and is easy to control.Due to the small contact area, the movement is

slow and the frictional force is as large as possible even on a soft surface.

1/2

PAGE 1
PuppyC (W/O M5StickC) Description PuppyC is a programmable four-legged robot base compatible with M5StickC. It contains the STM32F030F4 microcontroller，Four SG90 micro servos, a battery holder and an independent switch. PuppyC base needs to be used in conjunction with the M5StickC controller.After the StickC is programmed, it communicates with PuppyC through the I2C protocol (0x38) to control the steering motion. It walks slowly and is easy to control.
PAGE 2
Product Features Programmable robot Servo controller Four-legs walking Dimensions LxWxH：52mm * 60mm * 35mm Weight：58g Servo angle range：0-180° Applications Robotic pet Remote Control Robot Smart and cognitive toys Package Includes 1x PuppyC base 1x 16340 Battery(700mAh) 4x SG90 Servo 2/2