Datasheet

BugC (W/O M5StickC)

Description

BugC is a programmable robot base compatible with the M5StickC. This has four DC

motors, motor driver, two RGB LEDs, battery holder and a switch. The Bugc base needs

to be used in conjunction with the M5StickC controller. The base comes with an

STM32F030F4 micro controller which controls all the motors and LEDs and this is

controlled through I2C protocol(0x38) by the M5StickC which sits on top of the base.

Product Features

remote control

Programmable

1/2

PAGE 1
BugC (W/O M5StickC) Description BugC is a programmable robot base compatible with the M5StickC. This has four DC motors, motor driver, two RGB LEDs, battery holder and a switch. The Bugc base needs to be used in conjunction with the M5StickC controller. The base comes with an STM32F030F4 micro controller which controls all the motors and LEDs and this is controlled through I2C protocol(0x38) by the M5StickC which sits on top of the base.
PAGE 2
Four-way motor driver 4xGeared motors 2xRGB LEDs Simple and compact design Equipped with a battery holder Flexible movement in all directions Weight and Size Size: 55mm * 40mm * 25mm Output shaft: ⌀0.81mm Weight：34g Motor Specification Rated voltage: 3.