Datasheet

1/3
PLC M12
Description
you of the 'PLC' in industrial controll short for 'Programmable Logic Controller'. This PLC base is not the
typical 'PLC' used in programmable controller, but its does able to implement the most common
controller in industrial field. Based on the current M5 development system, you can add as many Realys
as you want, you can enable the TTL-RS485 communication, you can layout your customized circult on
If you need to add RS485 interface, soldering the RS485 board onto the mian board pin correspondingly.
The serial port pins on the RS485 board will be connected to the GPIO16 and GPIO17 of the PLC backplane.
Feature
Support 9-24V voltage input
Individual package weight: 0.1kg
Package size: 5cm * 5cm * 5cm (1.97in * 1.97in * 1.97in)
Include
1x PLC-Proto Broad
1x RS485 module
1x PLC Plastic Enclosure
1x Slide Guide
1x Magnet
1x 6 Pin 3.96 Pitch Terminal
M5Stack Docs
PLC M12 is a Base specifically design for industrial application. DC Power in 9-24V. Does this PLC remind
the protoboard. you also can make it an LoRa node by stacking a LoRa module etc. This base gives you an
unlimited number of combinations, it is powerful, flexible, and covered with an industrial-grade case. If
you happen to work in an industrial field, We especially recommend this PLC base to you which will surely
give you the best and the fastest way to resolve your requirement.