Datasheet

chip, which can effectively control the power consumption of the base
and a built-in green LED power indicator helps to notify the user of
battery level. The battery capacity has been upgraded to 390mAh, which
can power the core for much longer than the previous model.
The M5Core2 retains the SD card slot and speakers. However, in order to
ensure higher quality sound output, the I2S digital audio interface power
amplifier chip is used to effectively prevent signal distortion. There are
independent power and reset buttons on the left side and bottom of the
base.
The 3 icons on the front of the screen are capacitive buttons which are
programmable. There is a small expansion board on the back of the base
with a 6-axis IMU sensor and microphone.
Development platforms and programming languages supported by
M5Stack Core2 are as follows: Arduino, UIFlow and MicroPython No
matter what level of your development and programming skills, M5Stack
will help you turn your ideas into reality.
Power on/off:
• Power on: press the power button
• Power off: press the power button for 6s
Restart: press the reset button at the bottom