Datasheet

ManualsBrandsM5Stack ManualsCoreESP32 M5Core2 Development Module

M5Core2

SKU:K010

Description

M5Core2 is the second generation core device in the M5Stack

development kit series, which further enhances the functions of the

original generation of cores.

The MCU is an ESP32 model D0WDQ6-V3 and has dual core Xtensa®

32-bit 240Mhz LX6 processors that can be controlled separately. WiFi

and Bluetooth are supported as standard and it includes an on board

16MB Flash and 8MB PSRAM, USB TYPE-C interface for charging,

downloading of programs and serial communication, a 2.0-inch

integrated capacitive touch screen, and a built-in vibration motor.

M5Core2 also features a built-in RTC module which can provide accurate

timing. The power supply is managed by an AXP192 power management

Summary of content (9 pages)

PAGE 1
M5Core2 SKU:K010 Description M5Core2 is the second generation core device in the M5Stack development kit series, which further enhances the functions of the original generation of cores. The MCU is an ESP32 model D0WDQ6-V3 and has dual core Xtensa® 32-bit 240Mhz LX6 processors that can be controlled separately. WiFi and Bluetooth are supported as standard and it includes an on board 16MB Flash and 8MB PSRAM, USB TYPE-C interface for charging, downloading of programs and serial communication, a 2.
PAGE 2
chip, which can effectively control the power consumption of the base and a built-in green LED power indicator helps to notify the user of battery level. The battery capacity has been upgraded to 390mAh, which can power the core for much longer than the previous model. The M5Core2 retains the SD card slot and speakers. However, in order to ensure higher quality sound output, the I2S digital audio interface power amplifier chip is used to effectively prevent signal distortion.
PAGE 3
Product Features • ESP32-based, built-in Bluetooth,WiFi • 16M Flash，8M PSRAM • Built-in speaker, power indicator, vibration motor, RTC, I2S amplifier, capacitive touch screen, power button, reset button • TF card slot (16G Maximum size) • Built-in lithium battery, equipped with power management chip • Independent small board built-in 6-axis IMU, PDM microphone • M-Bus Socket & Pins • Programming Platform: UIFlow, MicroPython, Arduino Include • 1x M5Stack Core2 • 1x Type-C USB(20cm) Appli
PAGE 4
Resources Parameter ESP32-D0WD- 240MHz dual core, 600 DMIPS, 520KB SRAM, V3 Wi-Fi, dual mode Bluetooth Flash 16MB PSRAM 8MB Input Voltage 5V @ 500mA Interface TypeC x 1, GROVE(I2C+I/0+UART) x 1 IPS LCD Screen 2.
PAGE 5
Resources Parameter Net Weight g Gross Weight g Product Size 54 x 54 x 18mm Package Size 95 x 65 x 25mm Case Material Plastic ( PC ) EasyLoader EasyLoader is a concise and fast program writer, which has a built-in case program related to the product. It can be burned to the main control by simple steps to perform a series of function verification. Please install the corresponding driver according to the device type.
PAGE 6
PinMap LCD & TF card LCD ：320x240 TF card Maximum size 16GB CAP.
PAGE 7
AXP Power Indicator Light RTC IMU(3-axis gyroscope & 3-axis accelerometer) USB to serial chip Internal I2C connection
PAGE 8
M5Core2 M-BUS Schematic diagram M5Core2 PORT Description ESP32 ADC/DAC For more information about Pin assignment and Pin Remapping, Please refer to ESP32 Datasheet Related Link • Datasheet
PAGE 9
• ESP32 • FT6336U • NS4168 • MPU6886 • ILI9342C • SPM1423 • BM8563 • SY7088 • AXP192 Schematic • Schematic