Datasheet

1/2

Base BTC

Description

Note:

Although M5Core BASIC or GRAY can be attached to this base, but BTC can not charge them. Actually,

our Cores, as we know, are built in chargin chip (IP5306). After plugged a USB cable in, the Core was

charging without any charger.

Once M5Core has been attached to BTC, it can not controll ENV Unit at this time. Because BTC has

been built in DHT12 sensor which will cause IIC address conflict.

Product Features

DHT12 inside

Include

Type-C USB Cable

M3 x 16

Tools

BTC Base

Weight and Size

Package size:95mm x 65mm x 25mm

M5Stack Docs

BTC is a M5 base that allows you sit your M5 core instead of laying them down or hang on the wall. BTC

ot just a sit for holding the M5 core but also comes with serveral features like temperature and

humiluty detection(by DHT12), and charging base.

PAGE 1
M5Stack Docs Base BTC Description BTC is a M5 base that allows you sit your M5 core instead of laying them down or hang on the wall. BTC ot just a sit for holding the M5 core but also comes with serveral features like temperature and humiluty detection(by DHT12), and charging base. Note: Although M5Core BASIC or GRAY can be attached to this base, but BTC can not charge them. Actually, our Cores, as we know, are built in chargin chip (IP5306).
PAGE 2
Package weight:59g M5Stack Docs PinMap DHT12 ESP32 Chip GPIO22 GND GPIO21 3V3 DHT12 SCL GND SDA 3V3 Example Arduino IDE To get the code BTC.ino , please click here. arduino #include #include "DHT12.h" #include //The DHT12 uses I2C comunication. void setup() { M5.begin(); Wire.begin(); M5.Lcd.setBrightness(10); Serial.println(F("ENV Unit(DHT12 and BMP280) test...")); } void loop() { float tmp = dht12.readTemperature(); float hum = dht12.readHumidity(); Serial.