User guide

3. FAQ and Troubleshoot – Charging

This chapter provides frequently asked questions and its corresponding answers.

Charging

Q1. How to charge PDA using the cradle?

Step 1. Plug in the AC adapter plug to wall jack and DC

Jack to power connector of cradle.

Step 2. Insert the PDA to device slot to start charging the

PDA.

Caution

1. Use the correct AC adapter with 5.0V, 5A output provided by M3 Mobile.

2. Incongruent change of battery can cause the explosion.

3. When attached battery is completely discharged, plug charger to main body, then reset the device to check if the

screen is back on. Leave at least for 10 min in charging state before use.

Q2. Charging Status

Charging status of the PDA and the spare battery is

indicated by LEDs.

LED charging indicator on the cradle ( No. 2 in description)

indicates the charging status of the spare battery.

LED on upper left corner indicates the charging status of

the battery attached to the PDA.