www.m3mobile.co.kr MM3 Quick Manual Ver.1.
PACKAGE • Please check all items below are included in package box. < MM3 > < Cradle > < Battery > < Adaptor > < USB cable > < Stylus pen > ※Warning Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
FEATURES DEVICE Barcode Scan Window < 1D Scanner > < 2D Imager > LCD Touch Screen Camera Flash Pistol Grip Conductor Speaker HSDPA LED Scanner LED Charging LED Battery Lock Scanner Button Battery Keypad Reset Button IO Port 02 < Long-Range Scanner >
FEATURES KEYPAD MM3 has four types of keypad – 41keys, 55keys, 5250 and 3270/VT. Some function keys may not work depending on its options.
FEATURES KEYPAD SCAN Backlight toggle Power Soft 1 Soft 2 Green function Yellow function FIELD EXIT Back Space Numbers / 5250 functions Space Characters / F keys (F1-F24) Reset < 5250 > SCAN Backlight toggle Power Soft 1 Green function Back Space Numbers / 3270/VT functions CLR Home BKSP DUP Tab ENTER PA1 & PA2 * PA3 ( $ % ^ ! @ # NL Reset BRK Help + - Yellow function .
RESET SOFT RESET When an unexpected error occurs while using the device, SOFT RESET allows your device to restart, similar to rebooting a computer. It will adjust memory allocation - all records and entries are retained after soft reset but unsaved data or files may be lost. ▪ Press the RESET BUTTON briefly. CLEAN BOOT When an unexpected error cannot be solved with SOFT RESET, perform CLEAN BOOT to restart the system.
DEVICE SETUP CARD INSTALLATION SIM Card Installation ▪ Remove the battery from the battery pack. ▪ Insert the SIM Card as shown in the below picture. ▪ Insert the battery back to original position and check whether it is installed properly. SD Card SIM Card SD Card Installation ▪ Remove the battery from the battery pack. ▪ Insert the SD Card as shown in the upper picture. ▪ Insert the battery back to original position and check whether it is installed properly.
DEVICE SETUP BATTERY Inserting Battery ▪ Insert the battery to the battery pack position. ▪ Slide the battery lock to the left to lock the battery pack. Removing Battery ▪ Slide the battery lock to the right to unlock the battery pack. ▪ Then remove the battery from the battery position. ※Warning Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions.
DEVICE SETUP CHARGING How to charge ▪ Supply power to the cradle using the AC charger. ▪ Insert the PDA to device slot to start charging the PDA. Charging status Charging status of the PDA and the spare battery is indicated by LEDs. LED charging indicator on the cradle indicates the charging status of the spare battery. LED on right side in the middle of the device indicates the charging status of the battery attached to the PDA. Battery attached to the PDA The battery is being charged.
DATA CAPTURE SCANNER Scanning ▪ Launch the Scanner program (either ScanEmul or M3ScanTest). ▪ Press the SCAN BUTTON toward barcode to read. Make sure the laser beam covered whole barcode to read data properly. Imaging ▪ Launch the Scanner program. ▪ Press the SCAN BUTTON toward barcode to read. Make sure the laser beam covered whole barcode to read data properly. ※Warning LASER LIGHT - D o not stare into beam, CLASS 2 LASER PRODUCT 1.
DATA CAPTURE CAMERA Taking pictures ▪ Run the Camera program. ▪ Tab the Capture button to take a picture. ▪ Taken pictures are stored in Pictures&Videos folder. (Start\Programs\Pictures&Videos) Taking videos ▪ Run the Camera program. ▪ Tab the Video Mode button to take a video. ▪ Taken videos are stored in Pictures&Videos folder. (Start\Programs\Pictures&Videos) ※Warning It may cause significant damage to your eyes if you directly look the flash attached at camera module.
SERVICES AND SUPPORT Synchronize with your PC Please download the ActiveSync from Microsoft webpage to activesync with PC. ActiveSync : http://www.microsoft.com/downloads/en/details.aspx? FamilyID=9e641c34-6f7f-404d-a04b-dc09f8141141 Windows Mobile Device Center (Windows Vista and 7) : http://www.microsoft.com/windowsphone/en-us/howto/wp6/sync/ installing-wmdc.
MEMO 012
Headquarter/Service Center M3 bldg., 735-45, Yeoksam-Dong, Gangnam-gu, Seoul, 135-080, Korea Tel : +82 2 574 0037 Fax : +82 2 558 1253 www.m3mobile.co.kr sales@m3mobile.co.kr Copyright©2000 – 2011 M3 Mobile Co., Ltd. All Rights Reserved.