User's Manual

33
Via GPRS/EDGE (1)
z How to set GPRS/EDGE
– Select the 4th icon (configuration menu) on the program
menu.
– On the Configuration menu, select EGPRS settings.
– Insert setting values for desired network and click ok to save.
– User can check the saved EGPRS settings at [Start / Settings
/ Network and Dial-up Connections].
z How to connect to GPRS/EDGE
– User can connect to EGPRS by double clicking the EGPRS
icon at [Start / Settings / Network and Dial-up Connection].
– When user intends to connect to the Internet (e.g. opening
Internet Explorer), Connecting to EGPRS box pops up
automatically to let user to connect to EGPRS.
z How to disconnect EGPRS connection
– Double click the ‘EGPRS Tray Icon’ on the tray bar.
– Click disconnect button on ‘Connecting to EGPRS’ box.
H
o
w
t
o
u
s
e
I
n
t
e
r
n
e
t
If EGPRS is built in at manufacturing, the network setting is done by
default.
If the network setting is deleted by mistake, it can be restored by
resetting the device.
GPRS/EDGE Connect/Disconnect