MobileCompia (MC-6300S / MC-6500S) User Manual Please read “the safety guide” before use and use it in a proper manner. MobileCompia Homepage http://www.mobilecompia.co.kr All the information of user manual and programs in CD can be downloaded at the mobilecompia homepage.
Note 2 z This manual is subject to copyright protection along with all relevant rights. z No part of this document can be copied, reproduced, changed or translated in whole or in part by any means without prior written consent of MOBILECOMPIA Co., Ltd. z The content of the manual is provided “as-is” and be subject to change at any time without notice. z MOBILE COMPIA Co., Ltd.
Copyright and Agreement 3 z This user manual is provided “as-is”. It may contain editing error or omitting due to the difficulty of expressing technical feature. z If an application program provided by other supplier using by M3, refer to the supplier for a program manual. z The application program providers have the responsibility of indicating their contact number for customer service on M3 terminal, item box, or program.
Caution when using M3 (1) z User Caution – – – – – – – z Carrying and Storage Caution – – – 4 When the unit is lost or stolen, notify to network provider immediately. Do not rent the unit to third person without authorized permission. Do not use the unit while driving. For technical help, contact designated service centers. Contact responding suppliers directly for questions on applications and work programs other than hardware and basic installed applications.
Caution when using M3 (2) z Do not reconstruct – – – z Illegal copy of mobile phone is prohibited – – – 5 Do not reconstruct M3 for any purpose. It may cause fire in the unit, and wound or electric shock to users. Any defect caused by reconstructing units, can not get warranty. The person who reproduces mobile phone and uses this mobile phone is considered as criminals. The use of lost or stolen mobile phone is considered as a criminal act.
Size and Features Used frequency band 850 900 1800 1900 (TX) 824 ~ 849 MHz / (RX) 869 ~ 894 MHz (TX) 880 ~ 915 MHz / (RX) 925 ~ 960 MHz (TX) 1710 ~ 1785 MHz / (RX) 1805 ~ 1880 MHz (TX) 1850 ~ 1910 MHz / (RX) 1930 ~ 1990 MHz Band width 200 KHz External appearance 78.6 x 160 x 24.9mm (Width x length x height) Weight 300g Transmission output power Maximum 0.
Contents Note z Copyright and Agreement z Caution when using M3 z Size and Features 1. M3 Introduction z C o n t e n t s Product Composition Name and function of each part Input Button Soft/Hard Reset How to use stylus pen LED/Battery attaching/detaching Charging How to connect to PC How to optimize battery longevity 2.
Contents 5. How to use the Phone C o n t e n t s Init Screen Key Pad Status icon/Display window Phone function Voice Conversation via Bluetooth SMS send and receive/Phone settings 6. Usage of Scanner/Camera How to use Scanner How to use Camera 7. Usage of Pims Today InfoBox SmartMemo SWRecoder 8 43 44 45 46 47 48 49 50 51 52 53 54 55 60 63 8.
M 3 소 개 9 1.
Product Composition (1) M3 I n t r o d u c t i o n z At the first time of opening the product box, please check if it contains all the basic components, listed as following. M3 plus main terminal + 2 units of standard battery Ear Mic Phone + 2 units of Stylus pen 10 Cradle + USB cable Portable Adapter Manual CD + ActiveSync 3.
Product Composition (2) M3 I n t r o d u c t i o n z How to use the manual – – – – – This manual provides detailed information to make using the device easier and faster. The content related to phone or communication in this manual is only applicable when the device is equipped with GSM/GPRS/EDGE module for Voice and Data communication. The features described in this manual can not be used when it is not equipped in the device (e.g. GSM, WLAN, Bluetooth, IrDA, Scanner, Camera).
Name and function of each part (MC-6300S) M3 I n t r o d u c t i o n Charge Ramp(Left) Scanner Ramp(Right-Right) b Barcode Scanner Window Scanner Button Camera Button b Stylus Pen Antenna CF/SD extension Slot c c ESC Ear Mic Plug Function Key d Camera Lens e LCD touch Screen Charge & USB/serial port Upper (portable) Lower (Cradle) use 12 a a d Navigation Button LCD Power Button Battery Lock e Infrared Communication Port (IrDA) Reset Switch Battery
Name and function of each part (MC-6500S) M3 I n t r o d u c t i o n Charge Ramp(Left) GSM/GPRS/EDGE Status Ramp (Right-Left) Scanner Ramp(Right-Right) a d b a Scanner Button Camera Button Barcode Scanner Window b Stylus Pen Antenna Mini SD Extension Slot c d ESC c Ear Mic Plug Function Key d Flash e Camera Mirror Camera Lens LCD touch Screen Charge & USB/serial port Upper (portable) Lower (Cradle) use 13 Navigation Button LCD Power Button e Infrared Communication Port (IrDA) Battery Loc
Input Button M3 I n t r o d u c t i o n Button Power button Press Long press Function Button Backlight ON/OFF Press Number Input ESC button Press ESC (Escape) function Reset button Phone button Function button Press Navigation button Press Scanner button Press Return button Action Click Power ON/OFF Number button Camera button 14 Action Press Software Reset Click again after long press Hardware Reset (long press of about 4 seconds and then click one more time) Long press Power
Soft/Hard Reset M3 I n t r o d u c t i o n z Soft Reset – – – Press reset groove briefly as like the picture. For unexpected error occurred while using software, click reset button. In soft reset mode, application will be shut down, and unsaved data will be lost. However saved data and file will be safe. z Hard Reset – – – – Press reset groove for more than 4 seconds and the press it briefly one more time.
How to use Stylus Pen M3 I n t r o d u c t i o n 16 z Tap To select items or executing, tap the touch screen one time. z Double Click Similar function as mouse double click function of computer, click screen twice x2 z Long Press After tapping, leave Stylus pen touching the screen. This function is frequently used for file copy, delete, and paste or with when keyboard is using. To drag Similar function as mouse drag function of computer, with pressing screen, drag item to move to other position.
LED / Battery attaching/detaching M3 I n t r o d u c t i o n 17 z LED Alarm – Informs Charging, Scanner Status.
Charging z M3 I n t r o d u c t i o n z z Connect plug-in from charger to charge jack of main body, or charge jack of cradle, and then place main body onto cradle. Charging LED Type LED Status Details Direct charging to main body Red Green Charging Charging Complete Cradle Charging (Extra battery charging) Red Green Charging Charging Complete When charging, the status of the battery attached to main body can be confirmed by the LED left of upper corner of main body.
How to connect to PC M3 I n t r o d u c t i o n 19 z A cradle of M3 supports charging and USB connection. z Connecting step of cradle of M3 is as following. z z – Connect charger to USB cradle. (24pin connector) – Connect charger to power source. (to wall) – Connect USB cable of USB cradle to USB port of desktop PC. USB Host/Client – Place M3 onto docking cradle then execute Synchronization with Desktop PC.
How to optimize battery longevity M3 I n t r o d u c t i o n z When you work outside of office or at home, you will especially want your battery to last as long as possible. There are several tips for longer battery life. z When you are not using the device, turn it off by pressing LCD power button. – z When you use the battery power, if you do not touch the keyboard or use a stylus pen or mouse for more than 3 minutes, the device will automatically be shut down.
2.
Calibration B a s i c U s a g e 22 z Choose ‘Recalibrate’ on Control Panel / Stylus / Calibration tab (Fn + 4) z Screen setup wizard will start. Screen setup wizard calibrates the touch screen. z Press and hold the (+) mark for more than 1 second and release it. Keep chasing and pressing this (+) mark as it moves around. When all processes are complete, M3 will automatically show the main screen. Check if the LCD touch input works correct after calibration.
Main Window (1) B a s i c z Main window consists of Desktop and Taskbar. z In the background screen, you can see short cut icons of main programs. The details of icons are as follows: My Device : It displays the folders and files which the device contains. Recycle Bin: Completely delete or restore files and data. (After emptying the recycle bin, the files and data can not be restored anymore, so please be cautious) U s a g e Internet Explorer: It explores web or intranet.
Main Window (2) B a s i c U s a g e z The taskbar is designed to be simple and userfriendly. z Start icon is the starting point of program. If you point the start menu with the stylus pen, you can Details Low Battery setting, help, and run. If you choose each time, detailed Connected to Desktop PC via USB choice. If you select ‘Taskbar and Start Menu’, you can enable the general options like ‘Always on top’, ‘Auto hide’ and ‘Show Clock’.
Screen Rotation B a s i c U s a g e z Rotate the screen to different angle. With Screen rotation, screen can be rotated vertically or horizontally. Desktop screen is not applied with this function to get better rotation, set up the size of desktop screen within 240 x 240 pixels. z To rotate the screen: – Press the quick link icon and select the screen rotation. – Run application programs.
Infrared Communication B a s i c U s a g e z z z It carries out infrared communication using OBEX (Object Exchange Protocol). OBEX features provides an effective and simple binary protocol to exchange data in an efficient and convenient manner M3 can communicate with desktop, notebook, pocket PC as well as other PDA that has OBEX protocol for the IrDA communication. To use infrared communication Locate Infrared communication port to be in series with an infrared (IrDA) port with other device.
Bluetooth Communication (1) B a s i c z Bluetooth On/Off – – z The user can on/off the power of Bluetooth (will be called as ‘BT’ from now on) by selecting the Bluetooth Tray Icon. Switch to ON ( )/OFF ( ) by clicking BT ON/OFF on the popped up menu. Options Menu – Accessibility: Change of BT Device Name, Setting for Discoverable/Connectable Mode and Auto ON. Device Name It is a Name to be shown when other BT Device discovers the user’s BT.
Bluetooth Communication (2) B a s i c z Supported Service – – z Generic Serial – U s a g e ActiveSync, File Transfer, Business Card Exchange, LAN Access, Generic Serial, PAN Connection, Handsfree connection. Choose the service you want from the Bluetooth Manager and then start connecting procedure. – User can make a serial connection with other BT device that supports serial communication. On Bluetooth Serial communication, three ports are supported.
Function Key Mode B a s i c z U s a g e z If you press the down button on the left side, you can change the Function Mode. – – Pressing the Function key changes the state of Function in turn (Disabled) (Enabled) (Hold-Enabled) How to use the Function Key : – Press 1~8 number keys on Function Enable or Hold Mode. – Under Start < Programs < Utility < Buttons you can set the ‘User programs'. ※ You can view help by double clicking on the task bar.
Transcriber/Keyboard (1) B a s i c U s a g e z Transcriber – – When you want to key in characters in making document or setting, start Transcriber. Using the stylus pen you can draw characters that you want on the screen. This program will recognize the characters by itself and transform them into typeface characters. To start the Transcriber, run the program as the following order: start > program > Transcriber.
Transcriber/Keyboard (2) B a s i c U s a g e z Keyboard – Upper/lower case Selection – Hot key Selection – If you use hot key such as “z”, “x”, “c” and “v”, you can carry out Cancel, Cut, Copy, and Paste, respectively. If you want to change the features of soft keyboard, select keyboard in Go to Start> Setting> Control Panel> Input Panel and click the option you like to set up. Input Method 31 Press this icon to change upper and lower case letter.
3.
Via GPRS/EDGE (1) H o w z How to set GPRS/EDGE – – t o – – Select the 4th icon (configuration menu) on the program menu. On the Configuration menu, select EGPRS settings. Insert setting values for desired network and click ok to save. User can check the saved EGPRS settings at [Start / Settings / Network and Dial-up Connections].
Via GPRS/EDGE (2) H o w t o z How to connect the GPRS/EDGE manually – – – – Start / Settings / Network and Dial-up Connections or Control Panel / Network and Dial-up Connections. Select make new Connection. Enter the name of connection. check dial-up connection, and press next. (ex. Make Name:GPRS) Select Hayes Compatible on COM1 Press [configure..], and set [Device properties] . u s e – – I n t e r n e t 34 – – – Port Settings Tab : Set a Baud Rate to 460800.
Via Wireless LAN H o w z z t o You can connect to internet via Wireless LAN. Wireless LAN supports IEEE 802.11b and 802.11g. How to connect WLAN : – – – u s e I n t e r n e t 35 – z Turn on the AP (Access Point) device which supports IEEE 802.11b and 802.11g. Click quick link icon/ WLAN On. On the WLAN connecting program, choose the AP device and click connect. To disconnect WLAN, click quick link icon/ WLAN Off.
Via USB H o w z Using internet via direct USB connection to PC – t o u s e I n t e r n e t 36 z This connection method is used at ‘PC connection’ menu under control panel. Internet connection can be established by having a partnership with PC using USB ActiveSync. When you want to obtain upgraded program or file from internet, using USB connection can save the communication expense. How to connect – – At ActiveSync connection, please say ok or cancel for partnership request in order to use internet.
Via Bluetooth H o w t o u s e z Using internet via Bluetooth – Please turn on the Bluetooth dongle on PC which has a LAN service ability. – Please turn on the Bluetooth and click the Bluetooth icon on the tray bar. When the Bluetooth menu appears, choose BT Manager. – On the BT Manager, please select LAN Access. – Please follow the instruction on the screen.
4.
ActiveSync Introduction A c t i v e S y n c z Sync is an abbreviation of “Synchronization” and refers to the process of making data in PDA and desktop computer to be same by linking both data. – – z z Sync is an abbreviation of ‘Synchronization” and refers to the process of making data in PDA and desktop computer to be same by linking both data. When either PDA or PC modifies data, it updates others to the most recent data. Not all the data is synchronized at same time.
Installing ActiveSync A c t i v e S y n c z How to install ActiveSync – – – – – – – z Place Active Sync CD in CD Rom of desktop PC, installation will automatically executed. When clicking [next] button, if [your device was not detected] sign is shown, then click [cancel] button. Connect USB cable from cradle to computer USB port. Then place M3 on cradle after turn the screen on. If [new hardware searching wizard] screen is shown, then click [next]. Now driver will be installed automatically.
Synchronization of Data A c t i v e S y n c z If you see the Microsoft ActiveSync window in the desktop PC, you can find an option icon. If you click this option icon, taps such as “Sync Options”, “Sync Mode”, “Rules” will appear. z “Sync Options” is a menu that you can select an item to synchronize. – z z 41 Contact, Appointments, Tasks, File, Channel, etc. “Sync Mode” enables you to choose synchronization methods.
ActiveSync Troubleshooting A c t i v e S y n c z When active Sync is not working – Check the USB cable that connect the cradle and desktop PC if properly connected. – Check if LCD and power is on. – Open the windows by selecting [File>Connection Settings] of ActiveSync program. – – Check if [Allow USB connection with this desktop computer] is check marked. If it is not checked, please check it and then retry to sync. Try soft / hard reset.
5.
Init Screen H o w t o u s e z Phone Main Screen PhoneBook Call List SMS Configuration t h e P h o n e 44 PhoneBook Information Indicator Bar Operator Time&Date Call Status Call Key Clear Key End Key It shows Phone Book Dialog. Call List It shows recently dialed and received call SMS It shows received/Sent SMS and screen to write SMS. Configuratio n It manages settings for Phone and additional service.
Key Pad H o w t o z Key Pad ~ It is used to dial the number and can be used as speed-dial. u s e It runs the Phone Program. It can Show and Hide the Phone Program. t h e It inputs ‘*’, ‘#’ symbols. Long press of ‘*’ converts to Manner Mode and Long press of ‘#’ inputs ‘+’ symbol.
Status icon/Display window H o w t o u s e t h e P h o n e 46 z Status Icon – These are small icons which are located on the top of screen, indicating the state of Phone Program. It indicates the signal strength (full state). It indicates that there is no signal. Ready to call or receive / on the phone. Bell state (Bell, Vibration and Vibration & Bell). Mute / Unmute while on the phone. It indicates that there is SMS Message to read. It indicates the state of privacy lock.
Phone function H o w z How to turn on/off the phone – t o – To turn on the phone While phone is off, press the ‘End’ button for 2 to 3 seconds. The phone is on with initializing sound. To turn off the phone u s e z 47 Dialing – Insert the numbers using key pad on the phone main screen, and press ‘Call’ button. – If you press the ‘Call’ button without numbers, the recent call list will be displayed.
Voice Conversation via Bluetooth H o w z 1) Please set the Bluetooth Headset to Pairable mode. 2) Please do BT_ON and select BT Manager. 3) Select Hands free Connection and establish the connection to the Headset. t o u s e t h e P h o n e Connecting with a Bluetooth Headset z Making a phone call via Bluetooth Headset 1) Please connect the Headset with Bluetooth device. 2) Using the button on the Headset, you can connect the Headset to Bluetooth device, dialing and answering the call.
SMS send and receive/Configuration H o w z – – t o u s e t h e To receive SMS – z To send SMS – – z 49 To send SMS, please move to SMS message windows and select SMS write tap. Insert the number of receiver or retrieve the number by searching. As last click ‘Send’ button to send the SMS. The sent message is stored automatically in sent SMS list. Configuration – – P h o n e When SMS is received, the received content will be displayed on the popped up window.
6.
How to use Scanner U s a g e z How to use scanner – Usage of 1D Scanner o f S c a n n e r / C a m e r a 51 Correct way – Incorrect way Usage of 2D Scanner Correct way Incorrect way Scanner is optional. You can not use scan feature with no scanner enabled device. 2D Barcode Scanner is optional. Only with 2D Barcode scanner enabled device, you can do 2D barcode scan.
How to use Camera U s a g e z How to use the Camera demo program – – 52 – On Preview mode, you can turn on/off Flash by pressing Flash On/Off button. To turn off the camera – You can take picture by pressing the ‘Capture’ button after pressing ‘Start Preview’ button. The captured image will be saved in the path that you set on the option menu. Flash On/Off – Run the program and press the ‘Start Preview’ button.
7.
Today U s a g e z To get the Today window, select Start > Programs > Pims > Today. – – Today window displays the summarized information of user’s day schedule. Today window consists of sound, time, date, schedule, task, user information and manage item. If you click each item, you can view and edit it. The explanation of each icon on Today window is as following: It displays the property of Volume and Sound. o f It displays the property of Time and Date. It displays the day schedule of user.
InfoBox (1) U s a g e o f P i m s z InfoBox lets user to manage appointment, task and contacts easily with one application. – – – z InfoBox provides the capability to add, edit and delete appointment, anniversary, task and contacts. In InfoBox, you can vies appointment, anniversary and task daily, weekly and monthly. The infoBox can be synchronized with MS Outlook item by item.
InfoBox (2) U s a g e z Task Add/Edit/Delete – Task Add/Edit o f P i m s – Task View/Delete 56 In order to make a new task, tap on ‘InfoBox’ at the left bottom of InfoBox window or press the desired date for awhile and select ‘New Task’. You can also input a new task by pressing the Icon( ) on the tool bar and then press the icon( ) on the left-up side of task list. In order to edit existing task data, press the desired item from the list for awhile and select ‘Edit Task’.
InfoBox (3) U s a g e z Contacts Add/Edit/Delete – o f P i m s Contacts Add/Edit – Contacts View/Delete 57 In order to make a new contact, tap on ‘InfoBox’ at the left bottom of InfoBox window and select ‘New Contacts’. You can also input a new contacts by pressing the icon( ) on the tool bar and then press the icon( ) on the left-up side of contact list. In order to edit existing contacts data, press the desired item from the list for awhile and select ‘Edit Contacts’.
InfoBox (4) U s a g e z Toolbar o f P i m s Month display/change Anniversary display Year display/change Display be category Appointment display Return to current date – Year display / change – – Display by category – When this icon is pressed, the saved appointment will be displayed on daily/weekly/monthly list. When this icon is pressed, the saved task will be displayed on daily/weekly/monthly list.
InfoBox (5) U s a g e z Daily view – – z o f Weekly view – – P i m s – z When weekly view is selected, the relevant appointment, anniversary and task on that week will be displayed. If you press the relevant date, Appointment, Anniversary and Task will be displayed on the list with white, gray and blue ground respectively. Appointment, Task and Anniversary will be indicated with icon( ), icon( ) and black ground respectively on the relevant date.
SmartMemo (1) U s a g e z Settings – Category o f – P i m s When you press the Option menu on the bottom of window, you can set the location to save data and the default category which the program opens at. When the menu animation is active, the movement of menu box on new memo window will somewhat softer. Memo Menu – Color Change – If you press the palette icon( ) on the left-bottom of window, you can change the pen color.
Smart Memo (2) U s a g e z Memo Menu (Continue from previous page) – Mode Change If you press the left-down pen icon( Opaque/Transparent,, pen Partial/Total erase o f Erase current page Mode change menu Delete current page P i m s Delete entire memo Save and Exit – Alarm setting – If you press the alarm icon( ) on the right-bottom side, you can set the alarm for the relevant memo. You can check the current time from the alarm menu. Page Move / Exit 61 ), you can choose the mode.
Smart Memo (3) U s a g e o f z Writing a Memo / Memo List – How to write a memo – On the new memo page, you can write a memo using stylus pen. Memo List On the memo list, you can check the saved date and the number of pages. You can delete, copy and move the memo by pressing the relevant memo for awhile.
SWRecoder (1) U s a g e z Settings – Tool bar Stop Play Record Pause Time o f P i m s Option Menu Forward, Backward Progress bar On the toolbar, you can play, stop, record, forward, backward and move. If you press the option menu, you can set the channel and sample rate. High sample rate raises the quality of recording, but it requires bigger file capacity.
SWRecoder (2) U s a g e z Settings (Continue from previous page) – o f P i m s Saving / Sorting You can save the recorded data to My Documents, Flash Disk, SD MMC Card, and CF Card. The data will be saved as ‘ave’ file under Voice Memo folder on the relevant saving path. On the menu left-above, you can select the saving path. You can sort the list by name, by date and by size. You can select this on the right-above drop down menu.
8.
Calculator/Image Viewer A p p l i c a t i o n / U t i l i t y 66 z Calculator – – z M3 offers a calculator application. Using this application you can do a simple calculation. To run the calculator, select Go to start > Programs > Application > Calculator. Image Viewer – – You can see the image file using the image viewer. To run the image viewer, select Go to Start> Programs> Application Programs> Image Viewer. The viewer supports various image files such as jpg, gif, bmp, tif, png, etc.
MS-Backup A p p l i c a t i o n / U t i l i t y z Backup – How to set the saving location and name. – How to backup z All Data : All the file, registry and Pims data will be backed up except Flash Disk PIMS Data : Only Pims data will be backed up. Once you have completed with type, name and location setting, you can start the backup by pressing the ‘Backup Start’ button.
Menu Settings/Touch Protector A p p l i c a t i o n / U t i l i t y 68 z Menu Settings – – – z In the Menu, you can select the programs to be included in the favorites. The installed programs will automatically appear on the program list. Check the check box of the program to be added. You can see the added item in Start>Programs>Favorites Touch Protector – This utility is useful for protecting a touch screen being pressed while other application is in operation.
Safety Information 1 . SAFETY INFORMATION FOR FIXED WIRELESS TERMINALS .POTE NTIALLY EXPLOSIVE ATMOSPHERES Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cauls e an explosion or fire resulting in bodily injury or even death. INTERFERENCE TO MEDICAL DIVICES Certain electronic equipment may be shielded against RF signal from you wireless phone.
SAR INFORMATION THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules.
