User's Manual

Getting Started

 Plug in AC adaptor plug to wall jack and DC jack to power connector of

cradle.

 Insert PDA to device slot to start charging the PDA. Make sure that the

device is connected to the cradle correctly.

Please use authentic adaptor that M3 Mobile provides only.

If needed to use 110V, please purchase additional adaptor for use

Please use authentic cradle that M3 Mobile provides only, there might be

a malfunction and/or failure of device.

If PDA is in right position, charging LED will indicate red and it will start charging the

battery. It will change to green when the battery is fully charged.

There is another way of charging the battery by supplying power directly to the

device.

▪ Plug in the 24 pin connector to the device.