www.m3mobile.co.kr M3 SMART Quick Manual Ver.1.
PACKAGE ▪ Please check all items below are included in package box. < M3 SMART > < Cradle > < Battery > < Adaptor > < USB cable > < Stylus pen > ※Warning Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
FEATURES DEVICE Barcode Scan Window < 1D Scanner > Scanner Button < 2D Imager > Charging LED Volume Keys Scanner LED Scanner Button LCD Touch Screen Camera Button Battery Lock Reset Button Battery Keypad Charging & USB/serial Port POGO Pin 02
FEATURES KEYPAD M3 SMART has two types of keypads - AlphaNumeric and QWERTY. Some function keys may not work depending on its options.
RESET SOFT RESET When an unexpected error occurs while using the device, SOFT RESET allows your device to restart, similar to rebooting a computer. It will adjust memory allocation - all records and entries are retained after soft reset but unsaved data or files may be lost. ▪ Press the RESET BUTTON briefly. CLEAN BOOT When an unexpected error cannot be solved with SOFT RESET, perform CLEAN BOOT to restart the system.
DEVICE SETUP CARD INSTALLATION Micro SD Card Installation ▪ Remove the battery from the battery pack. ▪ Slide upward the memory card cover and lift it up . ▪ Insert the Micro SD Card as shown in the left picture. ▪ Close the memory card cover back and slide downward to lock. ▪ Check whether it is installed properly. SIM Card Installation ▪ Remove the battery from the battery pack. ▪ Insert the SIM Card as shown in the right User Manual M3 SMA RT picture.
DEVICE SETUP BATTERY Inserting Battery ▪ Insert the battery to the battery pack position. ▪ Slide the battery lock to the left to lock the battery pack. Removing Battery ▪ Slide the battery lock to the right to unlock the battery pack. ▪ Then remove the battery from the battery position. ※Warning Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions.
DEVICE SETUP CHARGING How to charge ▪ Supply power directly to the PDA using 24 Pin connector. ▪ Connect the 24 Pin connector to PDA to start charging the PDA. ▪ Charging the PDA via cradle can also be possible. Charging status Charging status of the PDA and the spare battery is indicated by LEDs. LED on upper right corner of the device indicates the charging status of the battery. LED charging indicator on the cradle indicates the charging status of the spare battery.
DATA CAPTURE SCANNER Scanning ▪ Launch the Scanner program (either ScanEmul or M3ScanTest). ▪ Press the SCAN BUTTON toward barcode to read. Make sure the laser beam covered whole barcode to read data properly. Imaging ▪ Launch the Scanner program. ▪ Press the SCAN BUTTON toward barcode to read. Make sure the laser beam covered whole barcode to read data properly. ※Warning LASER LIGHT - Do not stare into beam, CLASS 2 LASER PRODUCT 1.
DATA CAPTURE CAMERA Taking pictures ▪ Run the Camera program. ▪ Tab the Capture button to take a picture. ▪ Taken pictures are stored in Photo folder. (My Device\Flash Disk\Camera\Photo) * Video function is not supported in M3 SMARTCE version. ※Warning It may cause significant damage to your eyes if you directly look the flash attached at camera module.
SERVICES AND SUPPORT SYNCHRONIZE with YOUR PC Please download the ActiveSync from Microsoft webpage to activesync with PC. ActiveSync : http://www.microsoft.com/downloads/en/details. aspx?FamilyID=9e641c34-6f7f-404d-a04b-dc09f8141141 Windows Mobile Device Center (Windows Vista and 7) : http://www.microsoft.com/windowsphone/en-us/howto/wp6/sync/ installing-wmdc.
Headquarter / Services Factory Chun-ui Techno Park 201-610, M3 bldg., 735-45, 202, Chun-ui Dong, Won-Mi gu, Yeoksam-Dong, Gangnam-gu, Buchoen, Gyeonggi Do, 420-857, Korea Seoul, 135-080, Korea Tel: +82 32 326 0030 Tel : +82 2 574 0037 Fax: +82 32 623 0035 Fax : +82 2 558 1253 www.m3mobile.net sales@m3mobile.co.kr Copyright©2000 – 2012 M3 Mobile Co., Ltd. All Rights Reserved.
