www.m3mobile.co.kr M3 POS Quick Manual Ver.1.
PACKAGE ▪ Please check all items below are included in package box. < M3 POS > < Cradle > < Battery > < Adaptor > < USB cable > < Stylus pen > < DC to 24 pin Gender > ※Warning Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
FEATURES DEVICE Barcode Scan Window Paper check Window < Top View > Paper Output Ear-Phone connector MSR reader Scanner/ Feeding button LCD Touch screen Keypad Camera Leather strap Hook < Front View > Battery Lock Battery Charging / Serial Port < Rear View > 02
FEATURES KEYPAD Charging LED Scanner LED CDMA LED Send End Function 1 Function 2 Power Input Mode change Back Space Reset button Numbers 03
RESET SOFT RESET When an unexpected error occurs while using the device, SOFT RESET allows your device to restart, similar to rebooting a computer. It will adjust memory allocation - all records and entries are retained after soft reset but unsaved data or files may be lost. ▪ Press the RESET BUTTON briefly. HARD RESET When an unexpected error cannot be solved with SOFT RESET, perform HARD RESET to restart the system.
DEVICE SETUP INSTALLATION SD Card Installation ▪ Insert the SD Card to the SD card slot which is located at the left side of the device. ▪ Check whether it is installed properly. Paper Installation ▪ Push down the Printer Cover Switch to open Paper Output Cover. ▪ Insert rolled paper in Paper Slot properly and close the Paper Output Cover.
DEVICE SETUP BATTERY Inserting Battery ▪ Position the battery to the bottom of battery pack. ▪ Push down the battery and it clicks when the battery is in right position. Removing Battery ▪ Slide up the battery lock to unlock the battery pack. ▪ Then remove the battery from the battery position using small hole located at the upper left side of the battery pack. ※Warning Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions.
DEVICE SETUP BATTERY How to charge ▪ Plug in the AC adaptor plug to wall jack and DC Jack to power connector of cradle. ▪ Insert the PDA to device slot to start charging the PDA. Charging status Charging status of the PDA and the spare battery is indicated by LEDs. LED charging indicator on the cradle indicates the charging status of the spare battery. LED on upper left side of the keypad indicates the charging status of the battery attached to the PDA.
DATA CAPTURE SCANNER Scanning ▪ Launch the Scanner program (either ScanEmul or M3ScanTest). ▪ Press the SCAN BUTTON toward barcode to read. Make sure the laser beam covered whole barcode to read data properly. Imaging ▪ Launch the Scanner program. ▪ Press the SCAN BUTTON toward barcode to read. Make sure the laser beam covered whole barcode to read data properly. ※Warning LASER LIGHT - D o not stare into beam, CLASS 2 LASER PRODUCT 1.
DATA CAPTURE CAMERA ▪ Run the Camera program. ▪ Tab the Capture button to take a picture. ▪ Taken pictures are stored in Photo folder. (My Device\Flash Disk\Camera\Photo) * Video function is not supported in M3 POS. ※Warning It may cause significant damage to your eyes if you directly look the flash attached at camera module.
PAYMENT MSR READER ▪ Run the M3PosPrinterDemo program. ▪ Tab the ‘Open’ and ‘Read’ in MSR section to read the MSR. ▪ Make sure the card to read upside-down to let the magnetic part go through the MSR reader. ▪ Slide card left to right. ▪ Result can be read at ‘Result Window’. IC CARD READER ▪ Run the M3PosICCardDemo program. ▪ Tab the ‘Open’ to open port and read the IC Card. ▪ Insert card to IC Card Reader located at the right side of the device. ▪ Result can be read at ‘Result Window’.
SERVICES AND SUPPORT SYNCHRONIZE with YOUR PC Please download the ActiveSync from Microsoft webpage to activesync with PC. ActiveSync : http://www.microsoft.com/downloads/en/details. aspx?FamilyID=9e641c34-6f7f-404d-a04b-dc09f8141141 Windows Mobile Device Center (Windows Vista and 7) : http://www.microsoft.com/windowsphone/en-us/howto/wp6/sync/ installing-wmdc.
MEMO 012
MEMO 013
MEMO 014
Headquarter/Service Center M3 bldg., 735-45, Yeoksam-Dong, Gangnam-gu, Seoul, 135-080, Korea Tel : +82 2 574 0037 Fax : +82 2 558 1253 www.m3mobile.co.kr sales@m3mobile.co.kr Copyright©2000 – 2011 M3 Mobile Co., Ltd. All Rights Reserved.
