User's Manual

Via GPRS/EDGE (1)
z How to set GPRS/EDGE
– Select the 4th icon (configuration menu) on the program
menu.
– On the Configuration menu, select EGPRS settings.
Insert setting values for desired network and click ok to save
–
Insert
setting
values
for
desired
network
and
click
ok
to
save
.
– User can check the saved EGPRS settings at [Start / Settings
/ Network and Dial-up Connections].
z How to connect to GPRS/EDGE
–
User can connect to EGPRS by double clicking the EGPRS
User
can
connect
to
EGPRS
by
double
clicking
the
EGPRS
icon at [Start / Settings / Network and Dial-up Connection].
– When user intends to connect to the Internet (e.g. opening
Internet Explorer), Connecting to EGPRS box pops up
automatically to let user to connect to EGPRS.
z
How to disconnect EGPRS connection
z
How
to
disconnect
EGPRS
connection
– Double click the ‘EGPRS Tray Icon’ on the tray bar.
– Click disconnect button on ‘Connecting to EGPRS’ box.
If EGPRS is built in at manufacturing, the network setting is done by
df lt
34
d
e
f
au
lt
.
If the network setting is deleted by mistake, it can be restored by
resetting the device.
GPRS/EDGE Connect/Disconnect