User's Manual

Charging
z
Connect plug
in from charger to charge jack of main
z
Charging in Cradle
z
Connect
plug
-
in
from
charger
to
charge
jack
of
main
body, or charge jack of cradle, and then place main
body onto cradle.
z Charging LED
Type
LED Status
Details
z
Charging
in
Cradle
Se
p
arate Batter
y
Main body
Charging LED
Type
LED
Status
Details
Direct charging to main
body
Red
Green
Charging
Charging Complete
Cradle Charging
(Extra battery charging)
Red
Green
Charging
Charging Complete
py
Separate Battery
Charging LED
z When charging, the status of the battery attached to
main body can be confirmed by the LED left of upper
corner of main body. Also the status of Sub-battery
(Extra
battery
charging)
Green
Charging
Complete
z Charging using portable adapter
can be confirmed by the LED ri
g
ht of low corner of
Cradle.
Do not use any other charger except one (5.2 V / 3A) provided .
Make sure to handle it gentle; damage with excessive force may cause no warranty.
Incongruent
change
of
battery
can
cause
the
explosion
19
Incongruent
change
of
battery
can
cause
the
explosion
.
When attached battery is completely discharged, plug charger to main body, then reset
the device to check if screen is back on. To use, do at least 10 minute charging.