M2TECH HIFACE Two 192KHZ/24BIT DIGITAL AUDIO INTERFACE USER MANUAL REV.
M2Tech hiFace Two 192kHz/24bit digital audio interface www.m2tech.biz REVISION PrA – MARCH 2012 Warning! Changes or modifications not authorized by the manufacturer can invalidate the compliance to CE regulations and cause the unit to be no more suitable to use.
hiFace Two 192kHz/24bit digital audio interface REVISION PrA – MARCH 2012 M2Tech www.m2tech.biz Dear customer, thank you for purchasing hiFace Two. What you have is a first-rate USB-to-S/PDIF converter with many unique features conceived to obtain the best audio performance out of a music file. Even if getting digital music out of a PC, a Mac or a Linux computer is nowadays quite simple, much harder is to obtain the best sonic performance from it, due to intrinsic limits in USB 1.
M2Tech hiFace Two 192kHz/24bit digital audio interface www.m2tech.biz REVISION PrA – MARCH 2012 INDEX 1. Connections.....................................................................................................................5 2. Connection to the host .....................................................................................................6 3. True plug’n’play operation with Mac ................................................................................7 4.
M2Tech hiFace Two 192kHz/24bit digital audio interface www.m2tech.biz REVISION PrA – MARCH 2012 1. Connections 1 2 Figure 1 1) USB input. Connect directly to the USB 2.0 port of a PC, Mac or Linux-based computer, or use an USB extender (A male to A female). In the latter, the extender must be compliant with USB 2.0 and less than 3m, otherwise the bus performance will decrease and the correct operation of the interface will not be guaranteed. USB type A male connector 2) S/PDIF output.
hiFace Two 192kHz/24bit digital audio interface REVISION PrA – MARCH 2012 M2Tech www.m2tech.biz 2. Connection to the host ADVICE: Windows users must install the driver prior to connecting the hiFace to the PC (please refer to section 5). Please refer to section 1, “Connections”. Connect the hiFace Two to the host USB 2.0 port by inserting its USB plug (Figure 1, 1) into the host socket. If straight insertion is difficult or when in need of avoiding straight insertion, an USB 2.
hiFace Two 192kHz/24bit digital audio interface REVISION PrA – MARCH 2012 M2Tech www.m2tech.biz 3. True plug’n’play operation with Mac Mac computers with OSX 10.6.4 and later have a native support for audio devices compliant with USB 2.0 Audio class. This means that the driver is already included in the operating system and the user needs not to install anything: just connect the hiFace Two to your Mac and it will be immediately recognized by the OS and ready to use.
hiFace Two 192kHz/24bit digital audio interface REVISION PrA – MARCH 2012 M2Tech www.m2tech.biz 4. True plug’n’play operation with Linux Linux has a native support for audio devices compliant with USB 2.0 Audio class based on ALSA. This means that the driver is already included in the operating system and the user needs not to install anything: just connect the hiFace Two to your PC with Linux and it will be immediately recognized by the OS and ready to use. ALSA version needs to be 1.0.24 or later.
M2Tech hiFace Two 192kHz/24bit digital audio interface www.m2tech.biz REVISION PrA – MARCH 2012 5. Windows driver installation 5.1. Obtaining the driver The Windows driver for hiFace Two is available on the M2Tech website, in the download page (www.m2tech.biz/download.asp). Download the exe file containing the driver package and save it to a folder in your PC. This is a self-extracting file which will deliver a folder. Double-click on it to extract the folder.
M2Tech hiFace Two 192kHz/24bit digital audio interface www.m2tech.biz REVISION PrA – MARCH 2012 Follow the indications and plug the device in one port, then click on “Install”. The installation process continues showing the progress (Figure 3). Figure 3 At the end of the installation process, the wizard notify the completion (Figure 4 on next page). Click on “Finish” to complete the installation.
M2Tech hiFace Two 192kHz/24bit digital audio interface www.m2tech.
M2Tech hiFace Two 192kHz/24bit digital audio interface www.m2tech.biz REVISION PrA – MARCH 2012 5.3. Unistalling the driver Sometimes it is necessary to uninstall the driver to roll back to a previous version. Uninstall is a quite simple procedure. Go to the control panel and launch the “Application Installation” utility (Figure 5). Look for the hiFace Two driver item in the list. Double-click on it to launch uninstalling.
M2Tech hiFace Two 192kHz/24bit digital audio interface www.m2tech.biz REVISION PrA – MARCH 2012 Figure 6 At this point, the wizard will show up the installation progress (Figure 7), up to the end.
M2Tech hiFace Two 192kHz/24bit digital audio interface www.m2tech.biz REVISION PrA – MARCH 2012 After the uninstalling of all files related to the driver is complete, the “Next” button will be enabled. Click on it. The final message will appear (Figure 8). Click on “Finish” to complete uninstalling.
M2Tech hiFace Two 192kHz/24bit digital audio interface www.m2tech.biz REVISION PrA – MARCH 2012 6. Configuring the computer to use hiFace Two 6.1. Configuring a PC with Windows XP A PC with Windows XP can use hiFace Two in two different ways: Direct Sound (DS) and ASIO. The first mode is suitable for most players, such as Windows Media Player and iTunes, or for Internet streaming, while the second can be chosen (for better performance) with players which can operate in ASIO mode.
hiFace Two 192kHz/24bit digital audio interface REVISION PrA – MARCH 2012 M2Tech www.m2tech.biz Then, select the “Voice” Tab. Again, select “M2Tech Audio 2.0 Output” in the drop-down menu of the Playback area. Click on OK button. Please be adviced that even if the peripheral is listed as “kernel streaming”, it will operate in Direct Sound mode when listed here.
M2Tech hiFace Two 192kHz/24bit digital audio interface www.m2tech.biz REVISION PrA – MARCH 2012 6.2. Configuring a PC with Windows Vista or Windows 7 A PC with Windows Vista or Windows 7 can use hiFace Two in four different ways: Direct Sound (DS), Kernel Streaming (KS), WASAPI and ASIO.
M2Tech hiFace Two 192kHz/24bit digital audio interface www.m2tech.biz REVISION PrA – MARCH 2012 6.2.2. Configuring for Kernel Streaming with Windows Vista or Windows 7 As for Windows XP, Kernel Streaming has no standard setting in Windows Vista and Windows 7. KS must be selected in the specific player you choose to use. For example, when using FooBar, with hiFace Two connected to the PC, go to the File/Preferences/Playback /Output tab and select “KS: M2Tech Audio 2.0 Output” as output device.
M2Tech hiFace Two 192kHz/24bit digital audio interface www.m2tech.biz REVISION PrA – MARCH 2012 7. Configuring the player for Kernel Streaming: some examples 7.1. FooBar To use FooBar in KS mode it is necessary to download the DLL for Kernel Streaming from the FooBar2000 website and install it in the Components sub-folder inside FooBar2000 main folder in your hard disk. The DLL can be found at http://www.foobar2000.org/components/view/foo_out_ks (click on Download).
M2Tech hiFace Two 192kHz/24bit digital audio interface www.m2tech.biz REVISION PrA – MARCH 2012 7.2. Winamp and MediaMonkey These two players are actually the same player with different skins, so they can share the same plug-ins. A freeware plug-in for Kernel Streaming by Steve Monks is available on the Internet (http://www.stevemonks.com/ksplugin/) that can be used to enable Kernel Streaming operation with these players.
M2Tech hiFace Two 192kHz/24bit digital audio interface www.m2tech.
M2Tech hiFace Two 192kHz/24bit digital audio interface www.m2tech.biz REVISION PrA – MARCH 2012 8. Configuring the player for WASAPI: an example 8.1. FooBar To use FooBar with WASAPI under Windows 7 it is necessary to download the DLL for WASAPI from the FooBar2000 website and install it in the Components sub-folder inside FooBar2000 main folder in your hard disk. The DLL can be found at http://www.foobar2000.org/components/view/foo_out_wasapi (click on Download).
M2Tech hiFace Two 192kHz/24bit digital audio interface www.m2tech.biz REVISION PrA – MARCH 2012 9. Configuring the player for ASIO: an example 9.1. FooBar To use FooBar with ASIO under Windows 7 it is necessary to download the DLL for ASIO from the FooBar2000 website and install it in the Components sub-folder inside FooBar2000 main folder in your hard disk. The DLL can be found at http://www.foobar2000.org/components/view/foo_out_asio (click on Download). It is a zip folder which contains the DLL.
hiFace Two 192kHz/24bit digital audio interface REVISION PrA – MARCH 2012 M2Tech www.m2tech.biz 10. Interface Special Features 10.1. Precision oscillators hiFace Two uses two high precision, low phase noise oscillators as time base for data transfer to the DAC. This way, jitter is kept at a minimum, while output transfer is virtually isolated by the USB interface timing low stability. 10.2. Asynchronous transfer mode hiFace Two uses an asynchronous transfer mode to get data from the computer.
M2Tech hiFace Two 192kHz/24bit digital audio interface www.m2tech.biz REVISION PrA – MARCH 2012 11. Technical Specifications Sampling frequencies: ...................... 44.1, 48, 88.2, 96, 176.4, 192kHz Resolution:........................................ 16 to 24 bits USB: ................................................. 2.0 Audio class Compatibility: .................................... Windows XP(1), Windows Vista (32 & 64 bits), Windows 7 (32 & 64 bits); OSX (10.6.4 and later); Linux (ALSA 1.0.
