User manual

USER MANUAL PrestoAdvancedAD101_AD301_UG_000_UK
Descriptions and non-contractual illustrations in this document are given as an indication only.
M2M Design reserves the right to make any modification
12
Device Configuration
There are two methods which can be used to configure the PRESTO Advanced Router.
Administrator can use following methods to access router:
Web browser
Command line interface
Default access method is by web interface. This method provides administrator full set of privileges
for configuring and monitoring the router. Configuration, administration and monitoring of the PRESTO
Advanced Router can be performed through the web interface. The default IP address of the router is
192.168.1.1. Another method is by command line interface. This method has limited options for configuring
the PRESTO Advanced Router but still represents a very powerful tool when it comes to router setup and
monitoring. Another document deals with CLI commands and instructions.
Device configuration using web application
The PRESTO Advanced Router’s web-based utility allows you to set up the Router and perform
advanced configuration and troubleshooting. This chapter will explain all of the functions in this utility.
For local access to the PRESTO Advanced Router’s web-based utility, launch your web browser, and
enter the Router’s default IP address, 192.168.1.1, in the address field. A login screen prompts you for your
User name and Password. Default administration credentials are admin/admin.
If you want to use web interface for router administration please enter IP address of router into web
browser. Please disable Proxy server in web browser before proceed.
Figure 4 - User authentication
After successfully finished process of authentication of Username/Password you can access Main
Configuration Menu.
You can set all parameters of the PRESTO Advanced Router using web application. All
functionalities and parameters are organized within few main tabs (windows).