DS-ELSA-E009 Version 1.0 M2COMM ELSA-E 2.9 Inch ESL Tag (For Freezer) Hardware Specification (Model ES29-F) M2COMMUNICATION Inc.
DS-ELSA-E009 Version 1.0 COPYRIGHT AND DISCLAIMER Copyright © 2018 M2COMMUNICATION Inc. All rights reserved. This document is the property of M2COMMUNICATION Inc. It contains information which is confidential and proprietary to M2COMMUNICATION Inc. No part of this document may be copied, reproduced or disclosed to third parties without the prior written consent of M2COMMUNICATION Inc.
DS-ELSA-E009 Version 1.0 Revision Control Ver. Date Description of Change 1.
DS-ELSA-E009 Version 1.0 Table of Contents 1. Objective & Scope ............................................................................................ 6 1.1 Objective .......................................................................................................................... 6 1.2 Scope ............................................................................................................................... 6 1.3 Glossary ......................................................
DS-ELSA-E009 Version 1.0 9. Thermal ......................................................................................................... 15 9.1 Component Operating Temperature Limits .................................................................. 15 10. Climatic Environments ................................................................................... 16 10.1 Operating Temperature and Humidity .......................................................................... 16 10.
DS-ELSA-E009 Version 1.0 1. Objective & Scope 1.1 Objective This document defines the features and performance requirements for the M2COMM ELSA-E 2.9 inch ESL tag for freezer, to enable the successful integration with the other network equipment required for an ELSA system. To achieve this goal, the requirements detailed within this document will permit an independent evaluation. 1.2 Scope This specification is a definition of the M2COMM ELSA-E 2.
DS-ELSA-E009 Version 1.0 2. Overview The M2COMM ELSA-E 2.9 inch ESL tag for freezer is available either a white or black bezel enclosed within a clear plastic housing, and monochrome (Black and White) display. The tag utilizes a high resolution e-paper display for 180° viewing. Communications with the tag is via a unique wireless protocol, M2COMM’s proprietary Platanus network, tuned to optimize power consumption and network efficiency. 2.
DS-ELSA-E009 Version 1.0 3. Key Features and Components 3.1 Housing The tag housing will consist of three individually molded plastic parts comprised of the front cover, rear PCB/battery housing and the battery access cover. The housing shall be designed to allow easy customer access to the replaceable coin cell batteries. The housing shall be designed for easy access to a recessed wake-up/reset button that will be mounted on the tag PCB assembly.
DS-ELSA-E009 Version 1.0 4. System Physical Constraints 4.1 Power 3X Lithium Coin Cell batteries – CR2032 Each CR2032 battery energy reservoir is rated 210mAh (at 2.0V) 4.2 Installation Environments The tag shall comply with the requirements defined as a retail signage product, operating within the ISM band frequency range. 4.3 User Replaceable Items Lithium Coin Cell Batteries Locations of recessed tabs for battery cover removal 4.
DS-ELSA-E009 Version 1.0 5. Dimensions & Weight 5.1 Material Polycarbonate resin, TEIJIN PC Panlite L-1225L series 5.2 Key Dimensions 5.2.1 Housing Length x Width x Depth Dimensions are in mm Dimensional tolerance ±0.25mm 5.3 Part & Subassembly Dimensions & Tolerances Full dimensional tolerance analysis and critical-to-function analysis will be performed on the following; PCBA module Housing 5.
DS-ELSA-E009 Version 1.0 6. Labeling Requirements Each tag shall carry the following labels. 6.1 Unique Tag MAC address and Barcode Label Barcode shall be Code 128 compliant Label shall be adhered to the bottom edge of the tag as shown above. 6.2 Manufacturer and Compliance Label The manufacturer and compliance label shall be adhered to the rear of the tag as shown above.
DS-ELSA-E009 Version 1.0 7. Design for the Environment (DFE) 7.
DS-ELSA-E009 Version 1.0 8. Serviceability 8.1 Maintenance Items & Intervals No subsystems or components shall require scheduled maintenance intervals. 8.2 Switches The tag will be fitted with a multi-function switch, in the form of a momentary action switch. The switch shall be located on the PCB and will be accessible via a hole in the side of the rear cover to protect against accidental operation. Switch Functions; I. Wake up (Short Press) II. Deep Sleep (Long Press for 3~5 seconds) III.
DS-ELSA-E009 Version 1.0 IV. Show Devices detailed information (Double-click) V.
DS-ELSA-E009 Version 1.0 9. Thermal 9.1 Component Operating Temperature Limits In any permitted configuration, all the tag components shall remain within the component manufacturers' normal operating specifications.
DS-ELSA-E009 Version 1.0 10. Climatic Environments All tag features shall function normally in the operating ranges listed below. All tag features shall endure the non-operating ranges listed below without cosmetic or functional damage. 10.1 Operating Temperature and Humidity -25°C to +10°C, 16 hrs dwell at extreme; IEC 60068-2-1 35% to 55% RH at 40°C, non-condensed; IEC 60068-2-3 10.2 Shipping/Storage Temperature and Humidity 10.2.
DS-ELSA-E009 Version 1.0 11. Mechanical, EMC, Environmental & Safety Compliance 11.1 Random Vibration 1 to 200 Hz, 1.15 Grms, 30 minutes in Z axis, 10 minutes in X, Y and Z axes 11.2 Un-packaged Non-operating Free Fall 500mm drop height; 3 drops onto unit bottom face; IEC 60068-2-32. 11.3 Un-packaged Edge/Corner Drop 800mm drop height; 6 drops onto bottom face; IEC 60068-2-31. 800mm drop height; 3 drops onto each corner, 12 drops total; 3 drops onto each edge, 12 drops total; IEC 60068-2-31. 11.
DS-ELSA-E009 Version 1.0 11.4.2 Electrostatic Discharge CE (Europe): The Product shall comply with EN55024: 2010. The test method used shall be EN61000-4-2. The test level to be used is ±4kV air discharge and ±2kV contact discharge. 11.5 Warning 11.5.1 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
DS-ELSA-E009 Version 1.0 11.5.2 CE This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. National Restrictions - This device is intended for home and office use in all EU countries (and other countries following the EU directive 2014/53/EC) without any limitation except for the countries mentioned below: Country Bulgaria Restriction None France Indoor use limited to 10 mW e.i.r.p.
DS-ELSA-E009 Version 1.0 Bulgarian Български С настоящето, M2COMM декларира, че това безжично устройство е в съответствие със съществените изисквания и другите приложими разпоредби на Директива 2014/53/EC. Czech Edge-Core tímto prohlašuje, že tento Electronic Shelf Labels, ESL je ve shodě se Česky základními požadavky a dalšími příslušnými ustanoveními směrnice 2014/53/ES.
DS-ELSA-E009 Version 1.0 Polish Polski Niniejszym M2COMM oświadcza, że Electronic Shelf Labels, ESL jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 2014/53/EC. Portuguese M2COMM declara que este Electronic Shelf Labels, ESL está conforme com os Português requisitos essenciais e outras disposições da Directiva 2014/53/CE.
DS-ELSA-E009 Version 1.0 12. Part Numbers and Ordering Information The M2COMM ESL tag part numbering system is based upon tag size, color and country/region operating frequency, please refer to Section 2.1 for country/region radio channels; shown below are the part numbers available for the 2.9 inch tag.
