Technical Specs

Computer Configuration for ASIA LIGHT Installation :
It can be seen in the diagram below that the system architecture consists of several key components; a single or
multiple Access Points, several Routers, multiple End Devices (ESL tags) and the Platanus Daemon program running on
a desktop.
This ASIA LIGHT demo installation is designed to use either a static IP address for a single Access Point or a dynamic
IP address when multiple Access Points are installed.
IP Address Configuration (Static IP)
Ensure that your Access Point is connected to your computer.
Your M2COMM Access Point comes pre-configured with a default IP Address (192.168.2.1) and therefore prior
to installing the M2COMM ASIA LIGHT firmware and software (reference Section 3.2) it is necessary to modify
the IP Address of the Ethernet port on your computer that is cabled to the M2COMM Access Point so that they
can communicate with one another.
Ensure that your Access Point is connected to your computer.
On your computer open the Control Panel – Network and Internet – Network and Sharing Center
Using your computer mouse, click on Ethernet