Operation Manual

MT-700 35
character (
E
or
W
) in the Longitude entry line.
•
Use the
key to toggle
E
or
W
to select a hemisphere (East or West)
designator.
•
Push the
SELECT/ENT
knob or
to move the blinking cursor to the next
character in the Longitude entry.
•
Use the
SELECT/ENT
knob or the microphone keys 0~9 to enter the correct
Longitude value in degrees, minutes and seconds. When Longitude is complete,
the cursor moves to the Time entry line.
•
Push the
SELECT/ENT
knob or
to move the blinking cursor to the first
character in the Time entry.
•
Use the
SELECT/ENT
knob or the microphone keys 0~9 to enter the correct time of
day.
LOC
appears at the end of the Time line indicating entry must be local
time.
•
Enter your local time in hours and minutes. Use 12 hour AM/PM format if
a
or
p
appear after the minutes characters. The
SELECT/ENT
knob or the
microphone keys 0~9 toggle the
a
/
p
setting. If neither
a
or
p
appear in the
Time line, enter your local time, hours and minutes, in 24 hour format.
•
When Lat/Lon and Time values are correct, press and hold the
key to
return to the
MANUAL LL
menu page.
To turn Manual Lat/Lon On or Off:
•
Use the
SELECT/ENT
knob to select either On or Off on the
MANUAL LL
page.
•
Push the
SELECT/ENT
knob to store the selection.
•
Press the
key. The Main display appears. If Manual Lat/Lon is
turned On, and manually entered values are stored, the Lat/Lon values appear
in the lower two lines of the display. The
M
appearing at the end of the
Longitude line indicates that Manual Lat/Lon is turned On. When Manual
Lat/Lon is turned On, the manually entered position overrides any Lat/Lon
position from a navigation receiver.