Operation Manual

16 MT-700
Optional MT-RM01 Remote Mic Connection
In order for full remote control to function, optional
MT-RM01
Remote Mic must be
connected to your transceiver using the supplied 10m Extension Cable.
Connect the 10m Extension Cable to the Remote Mic Connector on the transceiver’s
rear panel, and then tighten the cable nut.
You can also connect an External Speaker to the
MT-RM01
Remote Mic.
10m Extension Cable
MT-700 (Rear)
Remote Microphone
MT-RM01
MT-RM01Extension Speaker
or
Remote Mic Connector
MT-RM01 Remote Mic and External Speaker Connections
Other end of 10m Extension Cable can be installed into a wall as a wall socket:
1. Make a large hole, and drill 3 screw holes on the wall using template sheet.
2. Insert the 10m Extension Cable into a large hole.
3. Connect the Gasket and Mounting Base to the 10m Extension Cable using the Nut.
4. Mount the Mounting Base to the wall using 3 screws.
Wall
Gasket
Mounting Base
Nut
10m Extention Cable
Wall Mount Kit Installation