Operation Manual

54 MT-500

9. REFERENCE

9.1 Maintenance

The MT-500 VHF transceiver is produced with proven processes and current

solid state technology. With reasonable care, your MT-500 will have a long

useful life.

The following precautions will prevent damage to the transceiver.

• Never press the PTT button unless an antenna or proper dummy load is

connected to the antenna jack.

• Do not operate the transceiver if the power source is not within the speci-

fied range of 11 to 16 Vdc.

• Replace the antenna and/or coaxial cable if damaged in any way or

severely weathered.

• Avoid continuous direct sunlight on the LCD.

• Avoid overextending the microphone cable.

• Do not use solvents or harsh chemicals to clean the microphone, case-

work or LCD display.

9.2 Special Functions

Clear Memory Channels

Clears the channel bank for the Memory Scan function.

• Press and hold the

MEM

key while turning power On.

New Microphone

Initializes the keypad when a new microphone is installed.

• Press and hold the

key on the microphone while turning power On.

Printer Operation

Initializes the Tx port for 4800 baud PC/printer interface.

• Press and hold the

key while turning power On.