Operation Manual

MT-500 53

CAUTION NOTE

Only one entry attempt is permitted. A warning is displayed after the first

attempt and ATIS ID entry is blocked. CALL YOUR DEALER FOR ASSIS-

TANCE.

To enter your ATIS ID:

• Press and hold the

CALL

key. Menu topics appear in the display.

• Rotate the SELECT/ENT knob to position the cursor on the ATIS ID topic.

• Push the SELECT/ENT knob. The ATIS ID menu appears in the display.

ATIS ID Set Screen

• Push the SELECT/ENT knob. The cursor after “9” is blinking. The first

numeral is always “9”.

• Use the SELECT/ENT knob or microphone keys 0~9 to enter the rest of 9

numerals.

• When the last numeral is selected, push the SELECT/ENT knob or

ENT

key.

• Push the SELECT/ENT knob or

ENT

key again. STORED OK appears

briefly in the lower line of the display completing the entry.

• Press the

key to rethrn to the Main display.

NOTE

If you use the MT-500 without entering ATIS ID, MT-500 will not be changed

to the transmit mode. In this situation, an error beep sounds even if press the

PTT key of microphone. TX indication does not appear in the display.