Operation Manual

32 MT-500

GPS ALERT

Provides ON/Off settings for GPS Alert. It is usually set to On. If data from

your GPS navigation receiver is lost, 3 quick error beeps are sounded and

**GPS OFF is displayed on the second line of the Normal Communication

screen, alternately with the date & time and channel name (alternately with

MEM CHANNEL and channel name, in case that displayed channel is memory

channel). Press the

END

key to silence the 3 quick error beeps.

To set the GPS Alert:

• Press and hold the

CALL

key. Menu topics appear in the display.

• Rotate the SELECT/ENT knob to position the cursor on the GPS ALERT

topic.

• Push the SELECT/ENT knob. The GPS ALERT menu appears in the

display.

INT

GPS Alert menu

• Rotate the SELECT/ENT knob to select ON or OFF.

• Push the SELECT/ENT knob to store the setting and exit the menu.

NOTE

Irrespective of this setting, 4 hours and 23.5 hours alert timer is effective. See

the 7. DSC OPERATION section.

CH NAME

Each channel is displayed with default channel name on the second line of

the Normal Communication screen, alternately with the date & time (alter-

nately with MEM CHANNEL, in case that channel is memory channel). You

can edit these channel names as you like.

To edit the channel names:

• Select the channel which you want to edit the channel name.

• Press and hold the

CALL

key. Menu topics appear in the display.

• Use the SELECT/ENT knob to position the cursor on the CH NAME topic.

• Push the SELECT/ENT knob. The CH NAME screen appears in the dis-

play.