Operation Manual

28 MT-500
• Push the SELECT/ENT knob. The SET LL/TIME screen appears.
USA INT
Manual LL Entry
• Push the SELECT/ENT knob or
ENT
key to place the blinking cursor on
the first character (N or S) in the Latitude entry line.
• Use the
EXIT
key to toggle N or S to select a hemisphere (North or South)
designator.
• Push SELECT/ENT knob or
ENT
to move the blinking cursor to the next
character in the Latitude entry.
• Use the SELECT/ENT knob or the microphone keys 0~9 to enter the cor-
rect Latitude value in degrees, minutes and seconds. When Latitude is
complete, the cursor moves to the Longitude line.
• Press the SELECT/ENT knob or
ENT
key to place the blinking cursor on
the first character (E or W) in the Longitude entry line.
• Use the
EXIT
key to toggle E or W to select a hemisphere (East or West)
designator.
• Push the SELECT/ENT knob or
ENT
to move the blinking cursor to the
next character in the Longitude entry.
• Use the SELECT/ENT knob or the microphone keys 0~9 to enter the cor-
rect Longitude value in degrees, minutes and seconds. When Longitude
is complete, the cursor moves to the Time entry line.
• Push the SELECT/ENT knob or
ENT
to move the blinking cursor to the
first character in the Time entry.
• Use the SELECT/ENT knob or the microphone keys 0~9 to enter the cor-
rect time of day. LOC appears at the end of the Time line indicating entry
must be local time.
• Enter your local time in hours and minutes. Use 12 hour AM/PM format
if a or p appear after the minutes characters. The SELECT/ENT knob or