Operation Manual

MT-500 25

• Push the SELECT/ENT knob. The DIRECTORY NAME/ID screen appears

presenting the name and MMSID for the selected directory entry. The

blinking cursor is positioned at the start of the entry’s name.

• Push the SELECT/ENT knob or

ENT

key. The cursor becomes an under-

line instead of a blinking square and moves to the first character position.

• Use the SELECT/ENT knob to move the underline cursor to the character

position needing change.

• Push the SELECT/ENT knob or

ENT

key. The blinking cursor appears.

• Use the SELECT/ENT knob or microphone keys to change the contents of

the character to the new value.

• When new value is correct, press the SELECT/ENT knob or the

ENT

key.

If more characters in the same line need changing, use the SELECT/ENT

knob or

ENT

EXIT

key to move the blinking cursor to the next desired

character. If no more changes are desired on the same line, press and hold

the

CALL

key to move the cursor back to the start of the line.

• When both the name and MMSID are correct, press and hold the

CALL

key to save the data and exit to the directory listing.

LAMP

Allows adjustment of illumination for the LCD display, keypad and micro-

phone keypad.

• Press and hold the

CALL

key. Menu topics appear in the display.

• Use the SELECT/ENT knob to position the cursor on the LAMP topic.

• Push the SELECT/ENT knob. The BRIGHTNESS adjust screen appears

in the display.

USA INT

Brightness Control

• Use the SELECT/ENT knob or microphone keys 0~3 to change the set-

ting.