Operation Manual

MT-500 23
with a blinking cursor next to the name line.
INT
Name and ID Screen
• Push the SELECT/ENT knob or
ENT
key to move the cursor to the first
character of the name line.
SPECIAL NOTE
Characters are entered in the name and ID fields using either the
SELECT/ENT knob or the microphone keys.
All letters in the alphabet, a space, and the numbers 0~9, plus punctuation
marks and some symbols may be used. The space character follows Z in the
alphabet when using the SELECT/ENT knob. Only numbers are allowed in
the ID field.
The following table shows the characters that may be entered in the name
field using the microphone keys.
syeKenohporciM
01
CBA
2
FED
3
IHG
4
LKJ
5
ONM
6
SRQP
7
VUT
8
Z
YXW
9
ecneuqeSretcarahCciremunahplA
01ADGJMPTW
ecapS-BEHKNQUX
(,CFILORVY
).?!:#'S&Z
%/ 23456789
Several additional special characters are available when entering the name
using the SELECT/ENT knob.
• Use the SELECT/ENT knob or microphone keys to select the desired let-
ter, number or symbol for the first character.
• If using the SELECT/ENT knob, push the SELECT/ENT knob or
ENT
key