Specifications

M.T.H. HO Operating Crossing Gate
4
UNPACKING THE CROSSING GATES
Removing and Unwrapping Your Product
Carefully remove and unwrap the product from the packaging.
What Else is in the Box?
·Slave Motor Enclosure
Masts (2) with the short barricade
arms attached (Use for 2 lane roads)
SELECTING THE INSTALLATION SITE
Obviously your scenery or scenery plan will have a major impact on the location of
your HO Crossing gates. However when selecting a location you must also consider
what is located under your benchwork.
Make sure that there is sufficient space without obstructions under the
benchwork. The amount of space required will depend on the number of
parallel tracks that separate the crossing gates.
Take into consideration any edging or bracing material.
Make sure that the connections and sensitivity control on the master
motor unit and the connections on the slave motor unit.
Make sure that you have a suitable location for mounting the speaker
·
·
·
·
Long Barricades (2) (Use for 4 lane roads)
Sensors (4 Pairs)
Metal Setup Template
Multiple Track Signs
Interconnect Cable
Wires for Power Connection
Screws
Speaker with Enclosure
Master Motor Enclosure
Instruction Manual (The one you are reading)