Operation Manual

16
USE
Display
Display Designation Function
0. Zero The heating zone is activated
1…9 Power level Selection of the cooking level
E Error message Electronic failure
A Heat accelerator Automatic cooking
H Residual heat The heating zone is hot
L Locking The control panel is locked
STARTING UP THE APPLIANCE
Before using your new hob
Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent
which risks causing blue-tinted colour on the glass surface.
Sensitive touches
Your ceramic hob is equipped with electronic controls with sensitive touch keys. When your
finger touches the key, the corresponding command is activated. This activation is validated by
a control light, a letter or a number in the display and/or a “beep” sound.
Touch only one key on the same time.
Starting-up
• Start-up/ switch off the hob
Action Control panel Display
To start Press key [ 0/I ] [ 0 ]
To stop Press key [ 0/I ] nothing or [ H ]
• Start-up/ switch off a heating zone
Action Control panel Display
Increase power Press key [ + ] [ 1 ] to [ 9 ]
Decrease power Press key [ - ] [ 9 ] to [ 1 ]
Stop Press simultaneous [ + ] and [ - ] [ 0 ] or [ H ]
If no action is made within 20 second the electronics returns in waiting position.