Operation Manual

19
Control panel
USE OF THE APPLIANCE
Sensitive touches
Your ceramic hob is equipped with electronic controls with sensitive touch keys.When your
finger touches the key, the corresponding command is activated. This activation is validated
by a control light, a letter or a number in the display and/or a “beep” sound.
Touch only one key on the same time.
Display
Display
Designation Function
0
Zero The heating zone is activated
1…9 Power level Selection of the cooking level
U Pan detection No pan or inadequate pan
A Heat accelerator Automatic cooking
E Error message Electronic failure
F Error message Heating zone failure
H Residual heat The heating zone is hot
P Booster The boosted power is activated
Residual heat indicator
After using a cooking zone an indicator in the form [ H ] will warn you that the surface
temperature is high. You should avoid touching this zone. There is a risk of getting burnt.
The residual heat can be used to save energy.
[ + ] key
Power display
Control light
cooking zone
On/Off key
[-] key for all 4
heating zones
Timer key
Control light timer
Timer
display
Booster key